Loading ...
Loading ...
Loading ...
SECTRON 2 .owYourwATERSO TE.E.WO.KS
I ]
i
2A. FACE PLATE TIMER FEATURES
RECHARGE NOW - If you have guests visiting, or
other times when you use more water than usual, you
could begin to run out of soft water If the softener is
net scheduled to regenerate for another day or 2, you
would get hard water until then If this happens, or you
think it might happen, press and hold in the HOLD-
RECHARGE NOW button [] for 3 seconds until
RCHG shows RCHG wil! flash in the display during
the regeneration, which lasts under 2 hours
NOTE:
Avoid using HOT water, while the softener regener-
ates, because bypass hard water will refill the water
heater (see "Automatic Bypass," page 13).
PRESENT TIME
IOCE-
RECHARGE DAY
SET/CLEAR
ON/OFF VACATION
HOLD RECHARGE NOW
VACATION - The day you leave on vacation, or other
long absence, press (DO NOT HOLD IN) the ON/
OFF-VACATION button @ VAC begins to flash in the
display (FIG. 6 ) The timer will keep time, but the
softener will not regenerate to waste water and salt
NOTE:
While in VACATION, the softener wil___lgo through a
regeneration if the RECHARGE NOW feature is
used (see above)_
To shut off the water supply to the softener, use, the
plumbing bypass valve(s) .... FIG_ 16, page 21.
When you return_ press the VACATION button
again to return the softener to service, and the
correct time of day in the display° Remember to do
this or the softener will not regenerate and you
will soon have hard water.
RE
G PRESENT TIME
RECHARGE TIME
RECHARGE DAY
SET/CLEAR
ON/OFF VACATION
HOLD RECHARGE NOW
ERROR CODE
An error code could appear in the face plate display if
a problem occurs in the softener t
electronics. Ifyou see an error code !_ = _!
l
instead of the present time of day, please call your
local Sears Service Department for service
Continued
9
Loading ...
Loading ...
Loading ...