Loading ...
Loading ...
Loading ...
SECTION 5 SE.vlcE.'s"rEcH.n.FO. ATIO.
I I
5E. WATER FLOW THROUGH THE SOFTENER VALVE
BRINING AND
BRINE RINSE CYCLES
VALVE
OUTLET
WATER)
ROTOR & DISC
VENTURI
NOZZLE DRVAIN
BRINE
FROM SALT
STORAGE
TANK
INLET
(HARD WATER)
TOP
DISTRIBUTOR
After fill, timer/switch action allows the motor to turn the rotor and disc into
BRINING position, Water fiow is directed to the nozzle Suction, created
by the nozzle and ventud, draws brine from the salt storage tank and
iniects it into the resin bed via the bottom distributor Flow continues out
the top distributor and to the drain Hard water is available at the valve
outlet
When the brine valve closes to end brine draw, water flow continues inthe
same directions to slowly RINSE brine from Ihe resin bed and to the drain
BACKWASH CYCLE
ROTOR & DISC
FLOW PLUG
Timedswitch action again allows the motor to turn the rotor & disc to place
Ihe valve in BACKWASH, stopping water flow to the nozzle Water is
routed down and out the bottom distributor, up through the bed, and out
the top distributor to the drain The fast flow (controlled by a flow plug in
the drain fitting) flushes dirt. sediments, iron deposits, remaining brine
and hardness to the drain
OUTLET
INLET
DISTRIBUTOR
RESIN iriS/ _t RESIN
BED _ _ BED
"_', BOTTOM
DiSTRiBUTOR
29
Loading ...
Loading ...
Loading ...