Loading ...
Loading ...
Loading ...
11
Microwave Oven Cancel
The Cancel keypad stops any microwave oven function except
for the Clock, Timer, and Control Lock.
The oven will also turn off when the door is opened. When the
door is opened, the element(s) and fan will turn off, but the oven
light will remain on. Close the door and touch START to resume
the preset cycle.
The oven cooling fan may continue to operate even after an
oven function has been canceled or completed, depending on
the oven temperature.
Clock
This is a 12-hour clock. Before setting, make sure the oven,
Timer, and Timed Cooking are off.
To Set:
1. Touch CLOCK/TOOLS.
2. Touch the number “1” keypad.
3. Touch the number keypads to set the time of day.
4. Touch CLOCK/TOOLS or START.
Tones
Tones are audible signals, indicating the following:
One beep
■ Valid keypad touch
■ Function has been entered
One chime
■ Preheat cycle has been completed
Three beeps
■ Invalid keypad touch
Three chimes
■ End of a cooking cycle
Four chimes
■ When timer reaches zero
Includes using the Kitchen Timer for functions other than
cooking.
Tone Volume
The volume is preset at low, but can be changed to high.
To Change: Touch CLOCK/TOOLS and then “4” to toggle
volume between high and low settings.
All Tones
All tones are preset on, but can be turned off.
To Turn Off/On: Touch CLOCK/TOOLS and then “3” to toggle
tones between On and Off settings.
NOTE: The Kitchen Timer is not affected by reminder tones.
End-of-Cycle and Reminder Tones
The Timed Cooking end-of-cycle and reminder tones are preset
on, but can be turned off. If all tones have been turned off, the
end-of- cycle and reminder tones cannot be independently
turned on.
To Turn Tones Off/On: Touch CLOCK/TOOLS and then “5” to
toggle tones between On and Off settings.
NOTE: The Kitchen Timer is not affected by these reminder
tones.
Tools (Microwave Oven Models)
The Tools selection keypad allows access to some hidden
functions within the Electronic Oven Control.
To Use:
1. Touch CLOCK/TOOLS. The oven display will scroll through
the various options.
You can also touch the Clock/Tools keypad repeatedly to
manually scroll through the list of options.
2. Touch the number keypad for the specific option to toggle
the function setup. Use the following chart as a guide.
TOOLS CHART
TOOLS MICROWAVE ONLY COMBO
1 Clock Clock
2 Temp Temp
3 Sound (On/Off) Sound (On/Off)
4 Sound (High/Low) Sound (High/Low)
5 End Tone End Tone
6 Turntable Calibrate
7 Language Sabbath
8 Demo Mode Turntable
9 Language
0 Demo Mode
Fahrenheit and Celsius
The temperature is preset in Fahrenheit; however it can be
changed to Celsius.
To Change: Touch CLOCK/TOOLS and then “2” to toggle
temperature between Fahrenheit and Celsius settings.
When the temperature is in Fahrenheit, “°F” follows the oven
temperature.
When the temperature is in Celsius, “°C” follows the oven
temperature.
Timer
The Timer can be set in minutes and seconds or hours and
minutes and counts down the set time.
NOTE: The Timer does not start or stop the oven.
Loading ...
Loading ...
Loading ...