Loading ...
Loading ...
Loading ...
Consumer Support
Troubleshooting TipsOperating Instructions
Safety Instructions Installation Instructions
About the shelves and bins. GEAppliances.com
Not all features are on all models.
Rearranging the Shelves
Refrigerator Compartment
Freezer Compartment
To remove:
Lift and slide left.
Rotate up and out.
To replace:
Holding the shelf diagonally,
insert the left end of the shelf
into the center of the shelf
supports on the side wall.
Insert the right end of the
shelf into the shelf supports
on the side wall. Rest each
end of the shelf on the
bottom of the shelf supports.
To remove:
Tilt the shelf up at the front.
Lift the shelf up at the back
and bring the shelf out.
To replace:
While tilting the shelf up, insert
the top hook at the back of the
shelf in a slot on the track.
Lower the front of the shelf until
the bottom of the shelf locks into
place.
Some models have wire shelves that
can be adjusted in the same manner.
Non-Adjustable Shelves on the Door
Detachable shelves deepen and enclose fixed
door shelves, providing more storage room and
greater storage flexibility.
To remove:
Lift the shelf straight up; then pull out.
To replace:
Engage the shelf extender in the molded
supports on the door and push down.
It will lock in place.
Adjustable Bins on the Door (on some models)
To remove:
Lift bin straight up; then pull out.
To replace or relocate:
Engage the bin in the molded supports
of the door and push down. Bin will lock
in place.
Tab
Opening
Front bar
Slide-Out Spillproof Shelf (on some models)
The slide-out spillproof shelf allows you to reach
items stored behind others. The special edges
are designed to help prevent spills from dripping
to lower shelves.
NOTE: The shelves are shipped with tape on the
back. Remove this tape before attempting to remove
the shelf.
To remove:
Remove all items from shelf.
Slide the shelf out until it stops.
Lift the front edge of the shelf until the tabs
are above the shelf frame.
Continue pulling the shelf forward until it
can be lifted out and removed.
To replace:
Place the rear of the shelf on the shelf frame
just behind the front bar.
Slide the shelf back until the tabs are above
the openings.
Lower the shelf so that the tabs go into the
openings; then slide the shelf all the way in.
Make sure that the shelf sits flat after reinstallation and
doesn’t move freely from side to side.
Make sure you push the shelves all the way in before you
close the door.
Freezer Tilt-Out Bin
(on some models)
Push the button as you tilt out the bin.
To remove:
Hold the sides of the bin and
lift it straight up; then pull out.
To replace:
Engage the ends of the bin
in the molded supports on the door and
push down. It will lock in place.
NOTE: Do not overload the bin.
Adjustable bins can easily be carried from refrigerator to work area.
NOTE: Bins for the refrigerator and freezer doors are different sizes and are not interchangeable.
5
Loading ...
Loading ...
Loading ...