Loading ...
Loading ...
Loading ...
E-30
Set the humidifying filter
Attach the water tray with the humidifying filter to the unit
Side cover
Humidifying filter
Clean the water tray
Wash the water tray to remove dirt.
If the valve is dirty with water scale, use an old, soft toothbrush to clean off the dirt.
If the water tray valve has come off, attach the valve.
6
7
8
CAUTION
5
Water tray
Tab (Long)
Water tray
Hole (Short)
Hole (long)
Tab (short)
Valve
Insert the valve tab (short) into the hole (short) of the water tray.
Insert the valve tab (long) into the hole (long) of the water tray.
CAUTION
Humidifying filter
(Continued)
CAUTION
Set by
aligning
the broad
sides
Do not attach the humidifying filter to the unit if it has a lot of water.
This might cause the water to leak.
CAUTION
Check that the spring makes the valve return to its original
position when the valve is pressed from below.
Insert the humidifying filter in the water tray.
Check that the spring makes the valve return to its original
position when the valve is pressed from below.
Insert the humidifying filter securely until it clicks.
If it is not securely inserted, it may cause water
leakage during operation.
If the humidifying filter is not attached, “ ” will be displayed on the
temperature / humidity monitor, and the unit will not operate. (P.E-39)
Insert the filters with caution as they may
get stuck inside the unit.
Securely insert the humidifying filter, making sure that
it is pressed until it reaches the back of the unit.
If it is not securely inserted, it may cause water
leakage during operation.
Also, attach the filter while holding down the unit.
When you use the product for a longer period, white or brown water scales may attach to the inner part
of the water tray or on the surface of the humidifying filter.
Water scales are residue minerals from tap-water that have not evaporated. If you continue to use the
filter without cleaning it, the water scale will come out from the vent in the form of a white powder, or
solidify and become difficult to remove, resulting in lower humidifying performance. In such a case,
replace the filter.
Depending on the quality of tap water used, water scale may attach quickly.
In such a case, clean the filter on a frequent basis.
Rinse the whole case without removing the humidifying filter.
(It might become deformed or damaged if removed. )
Do not deform the humidifying filter by scrubbing it with a brush or using excessive force.
(This will damage it and decrease its performance. )
A new humidifying filter may smell at the beginning. This is normal.
Replace the filter early if it is damaged. (P.E-31)
Water tray
Valve
In particular, clean the valve and the holes of the water
tray often. (When dirt builds up, the drainage performance
decreases and may cause water leakage.)
Cleaning
(Continued)
EP-M70E_EN.indd 30EP-M70E_EN.indd 30 2017/2/23 17:27:452017/2/23 17:27:45
Loading ...
Loading ...
Loading ...