Loading ...
Loading ...
Loading ...
E-22
Operating in Option
Rapid
For the fi rst hour, the unit operates in “High” airfl ow rate, and depending on the level of air contamination, the unit
will operate in either “High” or “Medium” airfl ow rate. For approximately 8 hours, room air will be forcefully circulated
in “High” airfl ow rate for approximately 10 minutes once every hour. Sensitivity of odor sensors will increase, and de-
pending on the level of air contamination, the unit will operate in either “High” or “Medium” airfl ow rate. Afterwards,
high-speed will be deactivated and the airfl ow rate will return to its previous “Auto” operation mode.
Use this when grilling, cooking hot pot, or in similar instances where the room is exposed to a great deal of strong
odor.
Odor
Once every hour, room air will be forcefully circulated in “High” airfl ow rate. Sensitivity of odor sensor will increase,
and depending on the level of air contamination, the unit will operate in either “High” or “Medium” airfl ow rate.
Use this regularly for environments with strong odors such as garbage, drainage, pet and other similar odors.
You can select Option while operating in “Air Purify” and “Humidify” modes.
Cannot switch while it has stopped or while operating “Skin Moist” mode.
The Quick Cycle will be switched at each touch.
Touch the button
(If it returns to No Display (Clear), it is in [Auto] airflow)
Option
Pollen Odor Rapid AbsenceNo Display (Clear) PM2.5 sensor
Useful Features
Pollen
Once every hour, room air will be forcefully circulated in “High” airfl ow rate. Sensitivity of odor and dust sensors will
increase, and depending on the level of air contamination, the unit will operate in either “High” or “Medium” airfl ow
rate. The fl ap direction will be diagonal.
Use this when worried about pollens getting into the air.
Absence
The unit will operate on “Max” airfl ow rate for the fi rst fi ve minutes (fl ap direction: upward), then it will operate for
about 55 minutes in “High” airfl ow rate (fl ap direction: swing (30 minutes) upward), and the unit will stop operating
afterwards.
(When in “Humidify” operation mode, the airfl ow rate is set to “Auto” depending on the humidity. The fl ap direction
will be diagonal
(P.E-21))
Use this to clean the room air while away.
The unit automatically stops operation when the air becomes clean, saving electricity cost.
(P.E-23)
(Eco Saving Operation)
PM2.5 sensor
Switch to sensing that is suitable for small particles, like PM2.5 (general term for micro particles below 2.5µm).
(P.E-24)
EP-M70E_EN.indd 22EP-M70E_EN.indd 22 2017/2/23 17:27:432017/2/23 17:27:43
Loading ...
Loading ...
Loading ...