Loading ...
Loading ...
Loading ...
E-15
Install the pre-filter to the unit
Attach the rear panel to the unit
Filter assembly
5
6
4
Securely plug the tabs of the pre-filter to the matching holes in the unit.
Slide the switch downwards (2 locations) to lock.
Gently pull the pre-filter to make sure it is not out of place.
Deodorizing filter
CAUTION
Install the filter assembly to the unit
Do not put excessive force and deform
the filter assembly.
If the filter assembly is deformed, it will
not be detected by the unit.
“ ” will be displayed on the
temperature / humidity monitor, and the
unit will not be able to operate. (P.E-
39)
Plug the tabs (2 locations) of the
upper part of the rear panel to
the matching holes in the unit.
Gently push the bottom sides of
the panel one after another, and
close it securely until it clicks.
Set the filter assembly so that you can see the label
Pre-filter
Switch
Slide the switch downward.
Plug the tabs of the pre-filter
Tab
Insertion hole
Insert to the hole
Preparations for Operation
Continued on next page
EP-M70E_EN.indd 15EP-M70E_EN.indd 15 2017/2/23 17:27:422017/2/23 17:27:42
Loading ...
Loading ...
Loading ...