• roduct Features:
• 8 vibration modes + 8 impact modes + APP control
• Product Color:
• Product Material: Silicone, liquid silicone, ABS
• Product Process: Main body: liquid silicone; top: ordinary silicone; plastic parts + electroplated gold
finish (Pantone 10126 C)
3896928 Telescopic Massage Wand
TREYI Product Specification
be made from engineering certification Quality confirmation Business confirmation approval
performance parameter
Product weight --g（） product size --mm
Product noise ＜ 65 dB Battery type 102550
discharge time ＞ 45 Min battery capacity 1400mAH
charging interval 2H Charging method Magnetic attraction (center distance 6.0 mm)
Motor model //// motor speed
/////
charging voltage DC 5V PCB board model
charging current 850mA Pantone Color Number
working voltage 3.7V soft rubber hardness
turn-off current ＜ 10uA Relevant certifications MSDS、 UN38.3
classification of waterproof
IPX7
surface temperature
number TR686
edition V1.0
date 2025.6.11
← Long press to turn main body vibration on/off; short press to switch frequency.
When turned on, the button light is on; short press makes it flash once.
← Long press to turn impact function on/off; short press to switch frequency.
When turned on, the button light is on.
← Long press to turn top vibration function on/off; short press to switch frequency.
When turned on, the button light is on; short press makes it flash once.
Note:
When any of the three buttons is long-pressed to turn on, the button light flashes, and the
device enters standby mode, ready for Bluetooth connection to the APP.
While charging, the button light flashes; when fully charged, the light stays on.
Button light color: White.
After power-off, short-press the impact button to reset the impact motor.
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to
operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
