Product Introduction
Manufacturer: GCteq Wireless (Shenzhen) Co., Ltd.
Website: http://www.gcteq.com
Checked
Certificated of qualification
Product Warranty Instructions
Wireless charger product after-sales service strictly in accordance with
Law of the PRC on the Protection of the Rights and Interests of
Consumers, and Product Quality Law of the People's Republic of China
Adopted to provide After-sales service.
The services are as follows:
1. Within 7 days from the next day after purchase (sign for), if this
product has performance failure, you can enjoy free return or exchange
service after being tested and determined by the after-sales service
center;
2. Within 15 days from the next day after you purchase (sign for), if this
product has performance failure, you can enjoy free exchange or repair
service after being tested and determined by the after-sales service
center;
3. Within 1 year from the next day after you purchase (sign for), if this
product has performance failure, you can enjoy free repair service after
being tested and determined by the after-sales service center.
Non warranty regulations
In one of the following cases, we don't offer three guarantees and only
charging maintenance will be provided:
1. Damage caused by improper use, maintenance and storage of consumers;
2. Damage caused by unauthorized service provider;
3. There is no valid invoice or proof of purchase;
4. Damage caused by majeure.
Common product faults
Phenomenon
Cause
Troubleshooting
This mark is the product pollution control mark, the number of which
represents the environmental service life. In this period of time, under
normal conditions of use harmful substances will not cause greater
pollution to the environment or damage to human life and property.
Name of parts
Hazardous substance
Elec troni c compo nents
Plas tic cas ing
Elec tropl ated al uminu m
allo y parts
Non- elect ropla ted met al part s
Doub le face d adhes ive tap e
Synt hetic c ork
Sili con par ts
Lead
(Pb)
Merc ury
(Hg)
Cadm ium
(Cd)
Hexa valen t
-Chr omium
(Cr(VI))
Poly bromi nated
-Bip henyl s
(PBB)
Poly bromi nated
diph enyl et hers
(PBDE)
This form is in term of Stipulation SJ/T 11364
O It means that the content of the harmful substance in a part of the part is lower than the limit
requirements specified in GB/T 26572.
X It means that the content of the harmful substance in a part of the part exceeds the limit
requirements specified in GB/T 26572.
Specification
320.00 mm
240.00 mm
Installation Precautions
Please read and follow the following precautions carefully before
installing and using this product:
1. Use a safety-standard adapter to power the device.
2. Wireless charging distance is 3-8mm.
3. Ensure no metal objects between charger and phone during charging.
4. Do not place magnetic cards in the charging area.
5. Do not exceed maximum charging distance for best experience.
User Manual
Wireless charging
not working
1. Power supply doesn't
meet requirements.
2. Poor contact in power
interface.
1. Use an adapter that meets
requirements.
2. Ensure secure connection
of power port.
Wireless charging
slow
1. Product body temperature
too high.
2. Misaligned wireless charging
area.
1. Let the product cool to room
temperature.
2. Place the phone in the center
of the charging area for better
alignment.
Hazardous Substance Declaration
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. The device has
been evaluated to meet general RF exposure requirement. The equipment complies
with FCC radiation exposure limits set forth for an uncontrolled environment. During
the operation of device a distance of 15 cm surrounding the device and 20 cm above
the top surface of the device must be respected.
FCC STATEMENT :
GF-20Lite
wirelesscharging
Cupholdermastercontrolbutton
Cupholderliftingbutton
USB-A+Type-C
1.Theproducthasacut-outsizeof270mm*195mm,
asshowninthefollowingimage:
270 mm
195 mm
R12mm
Productname
ProductModel
Multi-FunctionalMagTable
Inputpower
DC24V-36V
Output
15WMax
USB-Aoutput
Type-Coutput
30WMax
18WMax
Communication
standard
WPCQi2.0MPP
GF-20Lite
Inputinterface
01maleconnector
A+Coutput
15WMax
Automaticsensing
andlifting
wireless
charging
Whenawirelesschargingphoneisplacedin
thechargingarea,thewirelesscharging
padAutomaticallylift,andwhenthephoneisremoved,
thewirelesschargingpadautomaticallydescends
Protect
Overcurrent,overvoltage,shortcircuitprotection,
reversepolarityprotection,ESDelectrostaticprotection
Buttonicon
Button Function
Functional Description
Cup holder function
master control
cup holder
adjustment
Control the function switch
of the left and right cup holder
buttons
Key backlight
Press the touch button brießy
to lower the cup holder,Press
the button again brießy,
and the cup holder will ascend;
Note: When the device is wirelessly
charging a mobile phone, this button
is non-functional.
When the touch
button is pressed,
Bright blue back
light;After releasing
the button;Bright
white backlight.
White backlight
Button Instructions
FCC statement:
This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions: 1) this device may not cause harmful interference, and 2)
this device must accept any interference received, including interference that may
cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Radiation Exposure Statement
This device complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter. During the operation of device a
distance of 15 cm surrounding the device and 20 cm above the top surface of
thedevicemust be respected.
