OVERVIEW
1
6
8
2
3
4
5
7
NC
1.
NC Button
2.
Power Button
3.
LED Indicator
4.
USB-C Charging Port
5.
3.5 mm Audio Input
6.
Volume Up Button
7. Volume Down Button
8. Multi-Function Button (MFB)
WEARING
• Before wearing, peel o the protective film on the wearing detection sensor inside the le ear cup.
• Removing the protective film does not automatically enable the wearing detection feature.
This feature is turned o by default. To activate automatic playback / pause, go to the
soundcore app home page, tap the gear icon in the upper-right corner > More Settings >
Wearing Detection, and manually turn it on.
R
L
R
L
Wear the headphones with the "L" logo on your le ear and the "R" logo on your right ear.
Adjust the length of the headband for a comfortable fit and optimal noise cancelling peormance.
POWERING ON AND PAIRING
1
2
2s
soundcore Space 2
Android 6.0+
Fast Pair
soundcore Space 2
iOS & Others
soundcore Space 2
Connected
Bluetooth
Bluetooth
<
Setting
Tap to pair. Device will be tied to Your
Google Account.
L
First-Time Pairing: Press and hold the power button for 2 seconds to power on. The headphones will
automatically enter Bluetooth pairing mode when connecting for the first time. Select "soundcore
Space 2" on your device's Bluetooth list to connect.
• When pairing, the LED indicator will start flashing blue. Aer the pairing is successful, the LED indicator
will stay on for 3 seconds and then go o.
Google Fast Pairing: Enjoy instant pairing with your Android smartphone (running Android 6.0 and
above) via Fast Pair enabled by Google.
Please note that due to local regulations and Android device manufacturer system configurations,
Google Fast Pairing may not be available in some regions.
To manually pair or connect a second device, double-press the power button when the headphones
are turned on. Alternatively, with the headphones turned o, press and hold the power button for 5
seconds to enter Bluetooth pairing mode.
• The headphones will automatically power o aer 5 hours of inactivity when Bluetooth is
disconnected. The auto power-o duration can be customized in the app.
CHARGING
5 mins=4 hrs
2 hrs
L
When the battery is running low, you will hear a voice prompt.
Use the included USB-C charging cable to connect your headphones to a power source.
A full charge takes about 2 hours. A 5-minute quick charge provides up to 4 hours of wireless playtime.
• Ensure the USB-C port is completely dry before charging.
• Do not use the headphones while charging.
• If storing the headphones for an extended period, charge the battery every 6 months to
prevent over-discharge, which may cause the headphones to malfunction.
DUAL CONNECTIONS
soundcore Space 2
soundcore Space 2
×2
L
Dual Connections feature is enabled by default. If you prefer to disable this feature, tap the gear icon in
the upper-right corner to access Settings, then tap the toggle switch for Dual Connections to turn it o.
When already connected to one device, press the power button twice to pair with a new device.
• LDAC remains available when the headphones are connected to two devices at the same time.
Dual-Device Playback
There are two audio playback switching modes available in the soundcore app, giving you the ideal
flexibility for a seamless listening experience across smartphones, tablets, and computers.
• Automatic Switching: The headphones intelligently switch to the device that starts playback, ensuring
a seamless listening experience.
• Manual Switching: Pause playback on the current device, then start playback on the other connected
device to switch manually.
BUTTON CONTROLS
Switch ambient sound modes
(ANC / Transparency)
* Normal mode needs to be
enabled in the app.
NC
Press once
Power on / o Press and hold for 2 seconds
Play / Pause Press once
Next track
Press and hold for 2 seconds
Previous track
Press and hold for 2 seconds
Volume up
Press once
Volume down
Press once
Answer / End a call
Press once
Reject a call Press and hold for 2 seconds
Mute / Unmute the microphone Press and hold for 2 seconds
Activate Voice Assistant / Anka /
AI Translation / Nap Mode
* You can set your preferred
feature in the soundcore app.
Press and hold for 2 seconds
NOISE CANCELLATION
Press the NC button to activate noise cancellation, eectively reducing ambient noise so you can stay
focused on your music.
Note: Noise cancellation is the default mode upon powering on.
TRANSPARENCY
To stay aware of your surroundings while listening to music, switch to transparency mode via the NC
button.
WEARING DETECTION
The headphones feature built-in intelligent wearing detection that monitors your wearing status in real
time. Music will automatically pause when you take the headphones o and resume when you put them
back on.
• To ensure the wearing detection feature works normally, please note the following:
1. Proper Wearing
Make sure to wear the headphones correctly on your ears.
The sensor may not function properly if the headphones are hung around your neck, covered
by your hands, placed in a bag, or blocked by a hat, sca, or thick hair. In these cases, the
sensor may not detect your wearing status, preventing music from pausing or resuming
automatically.
2. Bluetooth Connection Required
This feature is only available when the headphones are connected via Bluetooth. It will not
function during wired listening.
3. Device and App Compatibility
Some devices or third-party music apps may not support automatic playback commands.
If wearing detection does not work as expected, please verify that your device and app are
compatible with this feature.
NAP MODE
Nap Mode provides you with a personalized relaxation experience. When this mode is activated, the
headphones automatically play built-in sounds to help you unwind, fall asleep, or take a short rest.
Noise cancellation will be enabled by default in Nap Mode and cannot be switched to another ambient
sound mode.
To enable Nap Mode, go to the home page, tap Controls > MFB > Long Press > Nap Mode.
1
2
3
• Press and hold the multi-function button: Enter / switch to Nap Mode
• Press the multi-function button again: Exit Nap Mode
• Press and hold the volume button: Switch background audio tracks
• Press the volume button: Adjust volume
You can set the default Nap Mode duration in the app. When the countdown finishes, an alarm will
sound. While the alarm is ringing, press any button to exit Nap Mode. If the timer is on and the alarm
hasn't sounded yet, you can exit Nap Mode early by pressing the multi-function button once.
• If you receive a call while in Nap Mode, please exit Nap Mode before answering to ensure
normal call audio.
LDAC
Enable LDAC in the soundcore app to enjoy high-resolution audio on devices running Android 8.0 or
later. This feature delivers higher sound quality but may increase power consumption and reduce
playtime. For the best LDAC peormance with stable Bluetooth connection, use LDAC in a low-
inteerence environment.
Follow the steps below to enable LDAC on your device:
1. Open the soundcore app and go to Settings.
2. Tap "Sound Mode".
3. Select "Preferred audio quality" to switch to LDAC codec.
4. If the headphones are connected to two devices simultaneously, a prompt will appear indicating that
LDAC is not supported in this state. Tap "Enable" in the pop-up to proceed.
5. Switching audio codecs takes about 10 seconds. You may be prompted to update your headphones'
firmware if an update is available.
WIRED LISTENING
3.5mm
L
Connect a 3.5mm AUX cable to listen to audio from an external device. Bluetooth will automatically turn
o when in wired listening mode.
• During wired listening, only the NC button is available for switching ambient sound modes
(ANC / Transparency). All other buttons will not function.
AI ASSISTANT
Before Use:
• Update the soundcore app to the latest version.
• Keep the app open and your headphones connected to your phone via Bluetooth while using the AI
assistant. On Android devices, allow the app to run in the background.
Note:
• The AI assistant prioritizes your privacy and data security.
• AI-generated responses are for reference only and may contain inaccuracies. Please use your
discretion.
• Feature inteaces may vary with app version updates.
What Anka Can Do for You
Function What It Does
Example Command (Say the following
to Anka aer activating with "Hey
Anka")
Answering Questions
Acts as your portable
encyclopedia. Ask any question
anytime.
"Why do giraes have such long necks?"
Casual Conversation
Chats with you like a friend would
and helps you relax.
"Tell me a joke."
Information Aggregation
Keeps you up to date with daily
news and updates.
"Tell me the latest tech news for today."
Information Lookup
Checks the weather, the latest
match scores, and more.
"What's the weather like in New York
today? Will I need an umbrella when I
go out?"
• Some voice commands may not work due to app limitations.
How to Access the Feature
1. Go to the Settings page, find the AI Chatting settings, and toggle on the "Hey Anka" voice wake-up
switch. Once enabled, simply say "Hey Anka" to activate the assistant.
1
2
3
2. In the soundcore app, go to Anka Page > Chat With Anka.
3. Go to the Control page, set the long press action of the MFB to trigger the Anka assistant. Aer this,
you can also access the Anka assistant instantly by long pressing the multi-function button on your
headphones.
1
2
3
AI TRANSLATION
Note: Feature paths and inteace visuals may change with soware updates. For the most accurate
guidance, please refer to your latest app version.
Before Use:
• Update the soundcore app to the latest version and ensure your headphones are connected to the
app.
• Disable Dual Connections.
Real-Time Translation
In settings where you're exposed to content in a foreign language for extended periods (e.g., lectures,
classes), real-time translation delivers continuous text display and audio playback of the translated
content with almost no lag.
In the soundcore app, go to Anka page and tap Real-Time Translation. Make sure your earbuds are
connected to the app.
1. Tap Real-Time Translation.
2. Tap the language section at the top of the page, then select Their Language and My Language.
3. Tap the microphone button to start recording.
Face-to-Face Translation
In the soundcore app, go to Anka page and tap Face-to-Face Translation.
When your headphones are connected to the app, follow the steps below to try out Face-to-Face
Translation.
1. Tap the language section at the top of the page, then select Their Language and My Language.
2. Tap the bottom-right button and speak to your headphones. The translation will play from your phone.
3. Tap the bottom-le button and speak into your phone. The translation will play from your earbuds.
Note: This feature works even if your headphones aren’t connected to the app. Just speak into your
phone, and the translation will play through its speaker.
RESETTING
5s
&
L R
You might need to reset your headphones if you experience connectivity or function issues.
Delete the pairing history from your Bluetooth device first. Press and hold the volume up and power
button simultaneously for 5 seconds until the LED flashes red three times.
SPECS
Specifications are subject to change without prior notice.
Input 5V 0.75A
Battery Capacity 750 mAh × 1
Charging Time
Quick charge: 5 min = 4 hr playback; Full charge:
approx. 2 hr
Playtime
ANC On: 50 Hours
ANC O: 70 Hours
LDAC + ANC On: 40 Hours
LDAC + ANC O: 45 Hours
Driver Size 40 mm
Frequency Response 20 Hz - 40 kHz
Impedance 16 Ω ± 15%
Bluetooth Version Bluetooth 6.1
Bluetooth Range 49 (15 m)
FIRMWARE UPDATE
You will be informed once a new firmware version is detected when you connect the headphones with
the app. Ensure the headphones are powered on and connected to a device until the firmware update
is complete. During the update, avoid using the headphonese and ensure stable access to the internet.
Default Open Port: Classic Bluetooth + BLE (Bluetooth Low Energy)
Port Description: Aer the device is powered on, both Classic Bluetooth visibility (or pairing mode) and
BLE broadcasting are automatically enabled, providing Bluetooth pairing (or control) services. The
Bluetooth service is disabled when the device is powered o.
Note: The 'x' of SN Code: xxxxxxxxxxxxxxxx is a variable, see below table.
Variable 'x' Range of variable Content
Eighth 0-9 or A-F
Denotes the hardware version which is
not eected on the safety compliance.
Ninth 8,9,A,B,C...
Denotes the year, 8 means 2018, 9 means
2019, A means 2020, B means 2021, C
means 2022, and so on.
Tenth and Eleventh 01,02,03...
Denotes weeks, 01 means the first week
of this year, 02 means the secondary
week of this year, and so on.
Twelh 1-7
Denotes date, 1 means Monday, 2 means
Tuesday..., 7 means Sunday and so on.
The last five 00001-99999 Denotes serial No.
Hereby, Anker Innovations Limited declares that this device is in compliance with The
Product Security and Telecommunications Infrastructure (Security Requirements for Relevant
Connectable Products) Regulations 2023. For the Statement of Compliance, visit the website:
https://uk.soundcore.com/pages/psti-related
CUSTOMER SERVICE
service@soundcore.com
uk.support@soundcore.com (UK)
ie.support@soundcore.com (IE)
support.mea@anker.com (MEA)
support.india@anker.com (IN)
ced-cn@anker.com (CN)
support@anker.com (JP)
support.kr@anker.com (KR)
( US/CA ) +1 (800) 988-7973
( UK ) +44 (0) 1604 936 200
( DE ) +49 (0) 69 9579 7960
( RSA ) +27 801112209
( UAE ) +971 8000 320 817
( KSA ) +966 8008 500 030
( KW ) +965 2206 9086
( EG ) +20 8000 000 826
( TR ) 00800 621 24 94
( IN ) +91 8000 504 414
( CN ) +86 400 0550 036
( JP ) 03 4455 7823
( KR ) +82 1666 8470
( AU/NZ ) +61 1800 920 330
( PL ) +48 800 707 993
( SE ) +46 20 012 33 22
