Charge Your soundcore 2
Flashing red Low battery
Steady red Charging
Steady white Fully charged
To preserve battery lifespan, fully charge at least once every 45 days.
Turn On / Off
Flashing Red Low Battery
Steady Red Being Charged
Steady White Fully Charged
Bluetooth Pairing
×1
ON
≤ 1m
soundcore 2
Press Enter pairing mode
Press and hold for more than 2 seconds Un-pair connected device and re-enter pairing mode
Flashing blue Pairing mode
Steady blue Connected to a device
When turned on, soundcore 2 will automatically connect to the last connected device if available. If not, soundcore
2 will enter pairing mode.
TWS (True Wireless Stereo) Mode
Two identical soundcore speakers can pair with each other for stereo sound. Both speakers can play the same
audio (one as the left channel and the other as the right channel).
With one speaker connected to a smartphone, press and hold the Bluetooth button for more than 2 seconds on
two speakers to enter TWS pairing mode.
>2s
PAIRING
CONNECTED
PAIRING
CONNECTED
Press and hold for more than 2 seconds Enter TWS pairing mode
Flashing blue TWS pairing mode
Flashing blue (the speaker connected to smartphone)
TWS connected
Steady blue (the other speaker)
Connect via AUX
• SoundLine AUX cable sold separately
• To return to Bluetooth mode, remove the AUX cable from your SoundCore 2.
Controls
1
Press Play / pause
Press and hold for 1
second
Activate Siri / other
voice control software
2
Double press Skip forward
Press Volume up / down
1
Press Answer / End call
Press and hold for 1 second Reject call
1
Press Put current call on hold and answer incoming call
1
Press Switch between held call and active call
Press and hold for 1 second Transfer a call between speaker and mobile phone
Steady blue On a call
Flashing blue Incoming call
Specifications
Input 5 V
⎓
2 A
Play time (varies by volume level and content) Up to 24 hours
Audio output 12W+
Impedance 3 Ω
Range 20 m / 66 ft
Size 168 x 47 x 56 mm / 6.6 x 1.9 x 2.2 in
Charging time 3 hours
Driver (full range) 1.5” x 2
Frequency response 70 Hz - 20 KHz
Bluetooth version V5.0
Waterproof rating IPX7
Weight 414 g / 14.6 oz
Hereby, Anker Innovations Limited declares that this device is in compliance with The Product Security and
Telecommunications Infrastructure (Security Requirements for Relevant Connectable Products) Regulations 2023.
For the Statement of Compliance, visit the website:
https://www.anker.com/uk/psti-related
Note: The 'x' of SN Code: xxxxxxxxxxxxxxxx is a variable, see below table.
Variable 'x' Range of variable Content
Seventh 0-9 or A-F
Denotes the hardware version which is not effected on the
safety compliance.
Eighth 8,9,A,B,C...
Denotes the year, 8 means 2018, 9 means 2019, A means 2020, B
means 2021, C means 2022, and so on.
Ninth and tenth 01,02,03...
Denotes weeks, 01 means the first week in this year, 02 means
the secondary week in this year, and so on.
Eleventh 1-7
Denotes date, 1 means Monday, 2 means Tuesday..., 7 means
Sunday and so on.
The last five 00001-99999 Denotes serial No.
