Technical Support and E-Warranty Certificate www.vevor.com/support
Plastic Welding Kit
MODEL: XCER-01
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and does not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.
- 1 -
MODEL: XCER-01
Note:The product picture is for reference, the actual details shall prevail
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to
contact us:
Technical Support and E-Warranty Certificate
www.vevor.com/support
This is the original instruction, please read all manual instructions carefully
before operating. VEVOR reserves a clear interpretation of our user
manual. The appearance of the product shall be subject to the product you
received. Please forgive us that we won't inform you again if there are any
technology or software updates on our product.
Plastic Welding Kit
- 2 -
Warning-To reduce the risk of injury, user must read instructions
manual carefully.
CORRECT DISPOSAL for Display
This product is subject to the provision of european Directive
2012/19/EU. The symbol showing a wheelie bin crossed through
indicates that the product requires separate refuse collection in the
European Union. This applies to the product and all accessories
marked with this symbol. Products marked as such may not be
discarded with normal domestic waste, but must be taken to
acollection point for recycling electrical and electronic devices.
Compliance is a EC security certification.
FCC Information:
CAUTION: Changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to
operate the equipment!
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
1) This product may cause harmful interference.
2)This product must accept any interference received, including
interference that may cause undesired operation.
WARNING: Changes or modifications to this product not expressly
approved by the party.responsible for compliance could void the
user's authority to operate the product.
Note: This product has been tested and found to comply with the
limits for a Class B digital device pursuant to Part 15 of the FCC
Rules, These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This product generates, uses and can radiate radio frequency energy,
and if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there
- 3 -
is no guarantee that interference will not occur in a particular
installation. If this product does cause harmful interference to radio or
television reception,which can be determined by turning the product
off and on, the user is encouraged to try to correct the interference by
one or more of the following measures.
· Reorient or relocate the receiving antenna.
· Increase the distance between the product and receiver.
· Connect the product to an outlet on a circuit different from that to
which the receiver is connected.
· Consult the dealer or an experienced radio/TV technician for
assistance.
Operation safety
WARNING:
Please read all instructions before using this product
It is the Owner's responsibility to ensure that all users of this product are
fully aware of all warnings and precautions.
1. To provide continued protection against risk of electric shock, connect to
properly grounded outlets only.
2. Do not immerse in water.
3. Hot Surface, Avoid Contact.
4. Shock Hazard. To provide continued protection apainst electric shock
disconnect from the power supply when not in use
5. Heat gun, soldering iron, desoldering iron must be placed on its stand when not
in use.
6. HOUSEHOLD AND INDOOR USE ONLY.
7. To prevent electric shock, unplug before replace the fuse and other service.
8. Replace only with same type and rating of fuse.
9. This appliance is not intended for use by persons (including children) with
reduced physica, sensory or mental capabilities,or lack of experience and
- 4 -
knowledge, unless they have been given supervision or instruction conceming use
of the appliance by a person responsible for their safety.
10. Children should be supervised to ensure that they do not play with the
appliance.
11. The soldering iron and desoldering iron is only to be used with the power
supply unit provided with the appliance.
12. lf the SUPPly CORD is damaged,it must be replaced by the manufacturer,its
service agent or similarly qualified persons in orderto avoid a hazard.
13. Any servicing should be performed by an authorized service representative
AND that the product has no user serviceable parts.
14. To reduce the risk of fire or electric shock, do not expose this product to rain or
moisture. Store indoors. Read instruction manual before using.
15. A fire may result if the appliance is not used with care, therefore -be carefully
when using the appliance in places where there are combustible materials;
- Do not apply to the same place for a long time;
- Do not use in presence of an explosive atmosphere;
- Be aware that heat may be conducted to combustible materials that are out of
sight
- Place the appliance on its stand after use and allow it to cool down before
storage
- Do not leave the appliance unattended when it is switched on.
16. To ensure personal safety, please turn off the power switch after work is
completed; When not in use for an extended period, please unplug the power
cord!!
17. The soldering iron should only be used for soldering. Do not hit the soldering
iron against the work surface to remove fluxresidues (Can be cleaned by the
cleaning device of the product), as doing so may seriously damage the soldering
iron.
18. Soldering produces fumes, ensure there is adequate ventilation.
19. After used, remember that cooling the unit, the handle should be placed on the
handle holder.
- 5 -
20. Longer detachable power-supply cords are available and may be used if care
is exercised in their use.
21. lf a long detachable power-supply cord is used;
1) The marked electrical rating of the detachable power- supply cord or extension
cord should be at least as great as the electrical rating of the appliance,
2) The extension cord should be a grounding type 3-wire cord;
3) The longer cord should be arranged so that it will not drape over the countertop
or tabletop where it can be tripped over, snagged, or pulled on unintentionally
(especially by children).
22. A short power- supply cord (or short detachable power- supply cord) is
provided to reduce the risks resulting from becoming entangled in or tripping over
a longer cord.
23. When using the brass wool tip cleaner (rosin-inside),
24. DO NOT inhale the fume generated or consume the solid-state rosin
25. DO NOT allow your skin and eyes to get in direct contact with the rosin.
SAVE THESE INSTRUCTIONS
APPLICATIONS
His product is externally heated. Preheating the heating wire 3-5 minutes
before use will produce smoke, which is a normal phenomenon. It will not
occur after preheating.
You can use this soldering iron to heat or iron the surface of subjects. Primary
applications include plastic melting, crack repair, heat sh- rinking , drying , and
other applications that involve high-temperature heating.
- 6 -
INSTALLATION STEPS
1. Loosen the fixing screws
2. Insert the triangular trowel head
3. Tighten the fixing screws until
the triangular trowel head is fixed.
OPERATION STEPS
Attach metal foil to the back of the
crack to fix the crack.
Polish the cracks with sponge sand
paper on the side to be repaired
- 7 -
According to the size and shape of the crack, cut the appropriate repair
net
Heat the repair net with a trowel
tool and insert it into the plastic
Melt the plastic welding rod,
reinforce the repair net, and finally
repair it.
MAINTENANCE&PRECAUTIONS
1. When operating, DO NOT pressure the soldering iron excessively, or
knock the soldering iron against objects.
2. Remove and clean the oxidization off the soldering iron tip periodically
3. To keep the soldering iron tip clean, use a steel brush to.clean the plastic
off it when it cools off.
- 8 -
Manufacturer: Shanghaimuxinmuyeyouxiangongsi
Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu,
shanghai 200000 CN.
Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD
NSW 2122 Australia
Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim
Place, Rancho Cucamonga, CA 91730
REP
UK
YH CONSULTING LIMITED. C/O YH Consulting
Limited Office 147, Centurion House, London
Road, Staines-upon-Thames, Surrey, TW18 4AX
REP
EC
E-CrossStu GmbH
Mainzer Landstr.69,
60329 Frankfurt am Main.
