SereneLife PSLCRP6 Solar Power Mole Repeller

Product's Documents

Below are documents related to this product, you can read online or download:

PSLCRP6 - Manuals

This is the main product document for model PSLCRP6.

The file format is pdf, 2 pages, you can download this manual here .

background
www.SereneLifeHome.com
Animal & Pest Control
Solar Power Mole Repeller
PSLCRP6 Solar Power Mole Repeller
Features:
Effectively Repels Unwanted Moles & Underground Pests
Built-in Solar Panel: Smart Self-Charging System
Rechargeable Battery Powered Design, Battery Included
Safely Uses Ultrasonic Vibrations to Make Pests Flee
Rugged Marine Grade Waterproof Construction
Integrated Spike for Outdoor In-Ground Mounting
Perfect for Gardens, Front Yards, Back Yards, Flowering Areas
Deters Moles, Voles, Gophers, Ground Hogs & Similar Rodents
Power ON/OFF Switch
Technical Specs:
Coverage Area: Up to 7,000'+ Square Feet
Battery Type: (1) x 'AA' Rechargeable, 800mAh
Marine Grade Waterproof Rating: IP-65
Construction Material: Engineered ABS
Ultrasonic Frequency: 40-10kHz
Power Consumption: 15mAh
PSLCRP6
The Solar Mole Repeller is designed to safely
and effectively repel underground rodents by
using sonic and ultrasonic vibrations.
This combination scare the pests, making them
flee the area. This repeller has an effective range
of up to 7,000 square feet. For best results, place
one solar sole repeller every 100 feet in affected
areas. The on-board battery can store enough
energy to power the unit for several days of little
or no sun; in some cases up to one full week.
background
www.SereneLifeHome.com
INSTALLATION:
IMPORTANT!!!
Do not dig into the ground until you have checked for underground cables or
wires.
Check with your local utility companies to ensure that you locate and mark any
underground utilities before installing.
Failure to do so is very dangerous and could result in personal injury or death.
NOTE:
Check the ground before installing the device; frozen or waterlogged ground is
not recommended.
First, bore or dig a small hole to make room for the device.
DO NOT use a hammer or excessive force when installing.
Choose a location that gets plenty of sunshine, this will ensure full charging of
the batteries and better results.
Operation:
1. Pick a location free from shade and cover, then dig a hole in the ground to place
the device.
2. Insert the stake (bar) into the ground, make sure the top is above to the surface
roughly 1”. Place soil around the unit, securing it in the earth.
3. For normal operation, press the switch "ON/OFF position
NOTE:
For first time use, leave power switch OFF for 2 full days of sunlight to charge.
Questions? Issues?
We are here to help!
Phone: (1) 718-535-1800
Email: suppor[email protected]
POWER ON/OFF
SWITCH

Specifications

SereneLife PSLCRP6 Questions and Answers