Bird Repellent
User Manual
PSLBRP4
Installation:
1. Unlatch battery door on back of unit and remove battery compartment.
Install 4 x AA alkaline batteries. SEE FIGURE 1
2. Put 2 screws on the wall .To place unit onto wall, push double wall mount hanging holes onto the screws.
SEE FIGURE 2. For best detection; the unit should be positioned on the wall between 4.8 -14.2 feet above
the ground.
3. Locate function switch on the front of the unit to select the Day Mode and Night Mode. SEE FIGURE 3
FIGURE 1 FIGURE 2
FIGURE 3 FIGURE 4
4. Day Mold: Select the Day Mold, the unit working at the sound function only in day time. sound and flash
light will working same time in night time ,
Night Mold: Select the Night Mold, the unit will work in sound function only in day time and flash light
will working only in night time.
Note: If you are worried to make a noise to disturb people at night time, we suggest you select the
Night Mode. FIGURE 4
5. Avoid placing unit behind any large trees, wall or object
Caution:
● Continuously use the Animal Repeller
● If storms are expected remove the unit from outdoor areas
● Turn off the unit if pets are playing around the protection area
● The unit must not to be immersed in water or any other liquid
● Do no cover PIR sensor lens
● If cleaning is required, dampen a soft cloth with mild soap water.
Refrain from using any chemical or abrasive cleaning agents as this
might damage the function of the unit.
