PEGBOARD SIDE PANEL FOR AP6372 & AP6572
MODEL NO: AP6372HPB
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
WARNING! Ensure Health & Safety, and local authority regulations are adhered to when assembling and using these shelves.
Locate shelves in a suitable area where they will not be an obstruction.
Keep the general area clean, uncluttered and ensure there is adequate lighting.
WARNING! Ensure shelving structure to which the side panels are being fitted is on a level and solid surface such as concrete before
fitting side panels.
Keep children and unauthorised persons away from the storage area.
DO NOT use the side panels for any purpose other than that for which they are designed.
DO NOT site the side panels out of doors.
DO NOT get the side panels wet or use in damp or wet locations or areas where there is condensation.
DO NOT clean the side panels fixings with any solvents which may damage the side panels coated surface.
Ensure that the side panels are properly and securely assembled before loading them with heavy items.
When loading the side panels the load must be evenly distributed.
Place heavier items on the lowermost locations.
Where possible heavier items should be evenly distributed across the side panels.
2. INTRODUCTION
Easily ts to the side of Sealey racking Model No’s AP6372 and AP6572 to create additional storage. Textured powder coating nish. To be used
with Sealey TTS range of storage hooks.
3. SPECIFICATION
Individual Board Size (H x W): ..........................910 x 610mm
Nett Weight: ................................................................ 4.85kg
4. CONTENTS
1 x Side panel (910 x 610mm)
4 x M4 Hex.Hd Screws x 20mm, 4 x M4 plain washers, 4 x M4 Hex. nuts
5. ASSEMBLY
5.1. Fit side panels to ends of shelf unit using M4 fixings (supplied).
5.2. Insert hex. hd. screws through the side panel upper and lower holes into the relevant locations on
the shelf unit and fix in place using the M4 plain washers and M4 hex. nuts on the inside face of the
shelf unit.
6. MAINTENANCE
6.1. Clean side panels with mild detergent and dry thoroughly with clean dry cloth.
DO NOT clean the side panels or fixings with any solvents which may damage the side panels coated surface.
7. END OF LIFE
7.1. Dispose of unit in accordance with the Environment Protection footer (below) and local/national guidelines.
Refer to
Instruction
Manual
AP6372HPB Issue:1 18/12/24
Original Language Version
© Jack Sealey Limited
Wear Protective
Gloves
Original Language Version
© Jack Sealey Limited
AP6372HPB Issue:1 18/12/24
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500 sales@sealey.co.uk www.sealey.co.uk
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts
without prior notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
REGISTER YOUR
PURCHASE HERE
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
