Loading ...
Loading ...
Loading ...
AXIS Q6000-E Mk II PTZ Network Camera
System Options
Note
The installation and management software tools are available from the support pages on www.axis.com/techsup
For products with multiple IP addresses channel 1 will have the address 192.168.0.90, channel 2 will have the address
192.168.0.91 and so on.
To reset the product to the factory default settings:
1. Press and hold the control button and the restart button at the same time.
2. Release the restart button but continue to hold down the control button for 15–30 seconds until the status LED indicator
ashes amber.
3. Release the control button. The process is complete when the status LED indicator turns green. The product has been reset
to the factory default settings. If no DHCP server is available on the network, the default IP address is 192.168.0.90
4. Using the installation and management software tools, assign an IP address, set the password and access the video stream
It is also possible to reset parameters to factory default via the web interface. Go to Setup > System Options > Maintenance and
click Default.
57
Loading ...
Loading ...
Loading ...