Axis 01005-001 ~ EOL Axis Q6000-E Mk II User Manual

Loading ...

AXIS Q6000-E Mk II PTZ Network Camera

System Options

Alternative HTTP port - Select this option to manually dene an external HTTP port. Enter a port in the range 1024–65535. If the

port eld is empty or contains the default setting, which is 0, a port number is automatically selected when enabling NAT traversal.

Note

• An alternative HTTP port can be used or be active even if NAT traversal is disabled. This is useful if your NAT router does not

support UPnP and you need to manually congure port forwarding in the NAT router.

• If you attempt to manually enter a port that is already in use, another available port is automatically selected.

• When the port is selected automatically it is displayed in this eld. To change this, enter a new port number and click Save.

FTP

The FTP server running in the Axis product enables upload of new rmware, user applications, etc. The FTP server can be disabled

under System Options > Network > TCP/IP > Advanced.

Note

This FTP server has nothing to do with the product’s ability to transfer images via FTP to other locations and servers.

RTSP

The RTSP server running in the Axis product allows a connecting client to start an H.264 stream. The RTSP port number can be

changed under System Options > Network > TCP/IP > Advanced. The default port is 554.

Note

H.264 video streams will not be available if the RTSP server is disabled.

SOCKS

SOCKS is a networking proxy protocol. The Axis product can be congured to use a SOCKS server to reach networks on the other

side of a rewall or proxy server. This functionality is useful if the Axis product is located on a local network behind a rewall, and

notications, uploads, alarms, etc need to be sent to a destination outside the local network (for example the Internet).

SOCKS is congured under System Options > Network > SOCKS. For more information, see the online help

QoS (Quality of Service)

QoS (Quality of Service) guarantees a certain level of a specied resource to selected trafc on a network. A QoS-aware network

prioritizes network trafc and provides a greater network reliability by controlling the amount of bandwidth an application may use.

The QoS settings are congured under System Options > Network > QoS. Using DSCP (Differentiated Services Codepoint) values, the

Axis product can mark different types of trafc.

SNMP

The Simple Network Management Protocol (SNMP) allows remote management of network devices. An SNMP community is the

group of devices and management station running SNMP. Community names are used to identify groups.

AXIS Video MIB (Management Information Base) for video hardware can be used to monitor Axis-specic, hardware-related

issues that may need administrative attention. For more information about AXIS Video MIB and to download MIB les, go to

www.axis.com/techsup

To enable and congure SNMP in the Axis product, go to the System Options > Network > SNMP page.

Depending on the level of security required, select the version on SNMP to use.

Traps are used by the Axis product to send messages to a management system on important events and status changes. Check Enable

traps and enter the IP address where the trap message should be sent and the Trap community that should receive the message.

Loading ...

Axis 01005-001 ~ EOL Q6000-E Mk II 8MP 360° PTZ Multi-sensor Camera 01005-001