Loading ...
Loading ...
Loading ...
BPRZRD
Polaris RZR
Receiver Installation Kit
BPRZRD
Polaris RZR
Receiver Installation Kit
INSTALLATION MANUAL
INSTALLATION MANUAL
- 8 -
- 9 -
MGR250B/150B source unit installation (lower dash mount)
1. Make sure the four holes on the lower dash mount panel have been drilled (Refer to the “Lower dash mount
panel” image on page 5).
Then fasten both the lower dash mount panel and the metal brace plate to the lower dash pocket panel of
your RZR as 3-in-1 panel. Refer to “Before you start (lower dash mount)” on page 5.
2. Fix MGR250B/150B source unit to the 3-in-1 panel by using the supplied adaptable mount panel, and the
plastic ring fastener of MGR250B/150B source unit.
Make sure the adaptable mount panel correctly ts by aligning its tabs (on the back side) with the four drilled
holes on the lower dash mount panel.
For the MGR250B/150B installation, the supplied upper dash mount panel and bolts and nuts/rubber feet
are no need.
1
2
3
Source unit
(MGR250B/150B)
Adaptable mount panel
Align four drilled holes
with the tabs
Plastic ring fastener of
MGR250B/150B
3-in-1 panel (Lower dash mount
panel, lower dash pocket panel of
your RZR and metal brace plate are
fastened together)
c) Final assembly (lower dash mount)
After your source unit is xed, secure it in the place where the lower dash pocket sits and replace the trim plate.
Loading ...