Loading ...
Loading ...
BPRZRD
Polaris RZR
Receiver Installation Kit
BPRZRD
Polaris RZR
Receiver Installation Kit
INSTALLATION MANUAL
INSTALLATION MANUAL
- 2 -
- 3 -
Specications
Compatibility
• Source unit: Most BOSS Audio System marine gauge radios with 3”-3.5”
• Vehicle: all Polaris RZR 900, 1000, Turbo and 4-seat models from 2014 to current year (excluding Pro XP)
Materials
• ABS plastic (except the metal brace plate)
Specications are subject to change without notice.
2019+ RZR XP1000 Upper Dash Mount Installation
The upper dash mount is applicable to the 2019+ Polaris RZR XP1000 models (excluding Pro XP).
The installation kit is compatible with the following marine gauge source units:
MGV550B, MGV520B, MGR450B, MGR350B, MGR250B and MRG150B.
a) Before you start (upper dash mount)
• Remove the upper dash pocket from your RZR as follows:
Remove the push pins that secure the upper dash pocket (set aside the push pins for the nal assembly),
then remove the upper dash pocket by tilting it away from the dash.
The upper dash pocket will not be installed. Your source unit attached to the installation kit will take its place.
• The installation kit has an adaptable mount panel which is required for the upper dash mount of the
following source units: MGV520B, MGR450B, MGR250B and MGR150B. MGV550B does not require the
adaptable mount panel.
For MGV520B and MGR450B, use a proper tool to drill four screw bit size holes on the adaptable mount
panel.
To drill holes, locate the four hole marks indicated as “MGV520B” or “MGR450B” on the back side of the
adaptable mount panel.
For MGR450B source unit, drill four holes
indicated as “MGR450B” for screw fastening.
For MGV520B source unit, drill four holes
indicated as “MGV520B” for screw fastening.
Adaptable mount panel
b) Upper install kit assembly
Depending on a BOSS Audio Systems source unit you have, installation method and kit may vary. Follow the
guideline below that applies to your source unit.
Loading ...
Loading ...
Loading ...