Loading ...
Loading ...
Loading ...
BPRZRD
Polaris RZR
Receiver Installation Kit
BPRZRD
Polaris RZR
Receiver Installation Kit
INSTALLATION MANUAL
INSTALLATION MANUAL
- 4 -
- 5 -
c) Final assembly (upper dash mount)
After your source unit is fastened to the upper dash mount panel, secure the upper dash mount panel in the
place where the previous upper dash pocket sits by using the push pins, and replace the trim plate.
2014-2018 RZR Lower Dash Mount Installation
The lower dash mount is applicable to the 2014-2018 Polaris RZR models.
The installation kit is compatible with the following marine gauge source units:
MGV550B, MGV520B, MGR450B, MGR350B, MGR250B and MRG150B.
a) Before you start (lower dash mount)
1. Locate the lower dash pocket and remove the lower dash pocket panel from your RZR. Some dash
disassembly may be required.
2. Find the lower dash mount panel from the supplied mounting kit. You need to drill four screw holes through
the lower dash mount panel. To drill holes, locate the four hole marks indicated for your source unit model
number on the back side of the lower dash mount panel.
Drill four holes indicated for the corresponding
source units. The drilled holes are used to fasten
your source unit.
MGV550B
MGV520B
MGR450B,
MGR250B/150B.
Lower dash mount panel
3. Fasten both the lower dash mount panel and the metal brace plate to the lower dash pocket panel of your RZR,
using the supplied four screws. Make sure the three pieces are correctly orientated before fastening.
Lower dash mount panel
RZR dash
Metal brace plate
Tip:
The drilled holes on the lower dash
mount panel shown in the illustration
is for reference.
The location of the drilled holes varies
according to different source units.
The drilled holes are used to fasten
the source unit only.
Loading ...
Loading ...
Loading ...