Loading ...
Loading ...
Loading ...
BPRZRD
Polaris RZR
Receiver Installation Kit
BPRZRD
Polaris RZR
Receiver Installation Kit
INSTALLATION MANUAL
INSTALLATION MANUAL
- 4 -
- 5 -
MGR450B source unit installation (upper dash mount)
1. Remove the trim plate from the front panel of the source unit, to access the four screw mounting holes.
2. Drill four screw holes on the back side of the adaptable mount panel for fastening of MGR450B source unit.
Refer to the “Adaptable Mount Panel” image on page 2.
3. Fix the source unit by using the supplied upper dash mount panel, adaptable mount panel and four supplied
bolts and ange threading nuts, nally xing with the U-shaped bracket of MGR450B source unit and two
supplied rubber feet.
IMPORTANT! When threading the ange nut on the bolt, make sure the wide at face of the nut points
inward (toward the metal plate) to allow locking function.
For the MGR450B installation, the supplied metal brace plate, lower dash mount panel and screws are no
need.
1
2
3
Trim plate
Source unit
(MGR450B)
Upper dash mount panel
Flange nut
Bolt
Adaptable mount panel
Drill four screw holes
indicated by model number
on the back side
U-shaped bracket
of MGR450B
MGR250B/150B source unit installation (upper dash mount)
1. Fix the source unit by using the supplied upper dash mount, adaptable mount panel, and the plastic ring
fastener of MGR250B/150B source unit.
For this source unit installation, the supplied metal brace plate, lower dash mount panel and bolts/nuts/
screws/rubber feet are no need.
1
2
Source unit
(MGR250B/150B)
Adaptable mount panel
Upper dash mount panel
Plastic ring fastener of
MGR250B/150B
Loading ...
Loading ...
Loading ...