Loading ...
Loading ...
Loading ...
38 39
6.11 GMT with Quick Set Mechanism
CALIBERS: RR1203, RR1303
See above instructions for “Automatic Watch” with the following changes.
• Day/Date Setting: Unscrew the crown and pull it out to position [1].
Turn the crown to set the day and the date. In order to prevent damage to
the date-switching mechanism, we advise not to manually reset the date
between 8PM and 2AM. Ensure that the date change takes place at midnight
and not at noon.
• Set the local time: In position [2], turn the crown forwards or backwards.
• Set the time of the second time zone: The quick set mechanism consists of
2 pushers. The pusher at 8 o’clock sets the GMT hand one hour earlier, while
the pusher at 10 o’clock sets it one hour later. There is a locking mechanism
to avoid setting the GMT hand by accident. To engage one of the pushers,
turn it for about 60 degrees (in any direction). Then push, set the GMT hand
to the desired position and once the setting is done, turn the pusher again to
disengage it. Once locked, it is not possible to press the pusher. Be aware
that pushing both pushers at the same time would damage the GMT
function and should not be done at any time. While using one pusher,
the other should be in locked position and both pushers should be in
locked position while adjusting the crown.
ENGLISH
• Date setting: From position [1], turn the crown counterclockwise until
the correct date is displayed in the date aperture, then push the crown back
to position [0]. It is necessary to correct the date after every month with
less than 31 days.
• In order to prevent damage to the date-switching mechanism, we advise not
to manually reset the date between 8PM and 2AM.
• Time setting: At position [2], the second hand is stopped. To set the time
for the Second Time Zone, turn the crown clockwise until the correct time
is shown; both hour and minute hands of local and second time zone will
move when the crown is turned clockwise. In order to set the Local Time,
then turn the crown counterclockwise. The second time zone hour hand will
be locked at the set time, only the minute hand will move to synchronize
the time setting of the local time zone.
6.12 Dual Time
CALIBERS: RR1301, RR1701
For the Dual Time models, the big
date aperture is shown under the
12 o’clock position, while the
second time zone indicator is
located at 6 o’clock.
See above instructions for
“Automatic Watch” with the following changes.
Loading ...
Loading ...
Loading ...