Loading ...
Loading ...
Loading ...
Selecting additional settings
66
Changing the door seal heater
setting
If condensation builds up on the door
seal for the refrigerator section doors,
this can be eliminated by selecting the
highest door seal heater setting ( ).
The factory default is (middle set-
ting).
Condensation will not usually form at
an average ambient temperature and
humidity.
If condensation should form on the
door seal at higher air humidity and a
lower ambient temperature, set the
door seal heater temperature to the
highest level.
Touch the On/Off sensor for the Su-
perFreeze function for approx. 5sec-
onds.
The indicator light in the right-hand
side of the display will light up at this
time and after approx. 5seconds S will
flash in the bottom (freezer section)
temperature display. MENU will light up
in the display. You are now in Settings
mode.
Touch one of the sensors for setting
the temperature in the freezer section
repeatedly until flashes in the bot-
tom temperature display.
Touch the Super sensor again.
The last selected setting lights up in the
display.
You can alter the heater level by
touching the sensors for setting the
temperature in the freezer section:
- :
Middle heater setting (in the event of
slight condensation on door seal)
- :
Highest heater setting (in the event of
heavy condensation on the door seal)
- :
Heater is deactivated.
Loading ...
Loading ...
Loading ...