Loading ...
Loading ...
Loading ...
Installation
*INSTALLATION*
30
Check the surroundings for possible
collisions (see “Installation – Dimen-
sions with appliance door open”).
Only install the refrigeration appliance
in stable, solid installation niches, po-
sitioned on an even and level floor.
Also check the installation niche for
the following criteria:
- The side panels of the installation
niche must be even.
- The surrounding walls of the installa-
tion niche must be at least
5/8" (16mm) thick.
- The surrounding walls must be se-
curely fixed to the floor or wall.
Preparing the niche
Keep the doors to the appliance
closed until it is fixed inside the
building-in niche.
Danger of tipping over!
Due to the sheer size and weight of
the appliance, it needs to be ensured
that it cannot tip forwards once it is
built into the niche.
Fitting the anti-tip device
The anti-tip device ensures that the ap-
pliance is fixed securely into the build-
ing-in niche, preventing the appliance
from tipping forwards.
Mark the mid line of the appliance on
the back of the building-in niche. Line
up the center of the anti-tip device
with this line.
Caution! The water line or power
supply could get damaged.
Please ensure that neither the water
line nor the power supply are located
in this area, as these could be dam-
aged during installation e.g. by
screws.
Fixing screws for different uses and
types of material are supplied in the
accompanying pack.
If these are not suitable for the anti-
tipping device in your installation,
you will need to secure it by alterna-
tive means.
Loading ...
Loading ...
Loading ...