Loading ...
Loading ...
Loading ...
Installation
*INSTALLATION*
44
Insert the water filter with the de-
pression facing downward toward the
adapter.
Risk of damage
Do not overtighten the union nut, as
this can cause damage.
Connect the union nut to the sole-
noid valve, and tighten it.
If you want to divert the water line by
90°, screw on the elbow.
In case of a water line with a 1/4"
thread:
Connect the water line (e.g., cop-
per) to the adapter or elbow us-
ing the clamping ring and nut.
In case of a water line with a 7/16"
24-UNS thread:
Connect water line directly to the
adapter or elbow (clamping
ring and nut are not required).
Connect the water line to the shutoff
valve.
Briefly open the shutoff valve to vent
the water line.
The position of the solenoid valve as
shown in this diagram may differ from
your appliance.
Now connect the water line to the so-
lenoid valve.
Slowly open the shut-off valve in the
water supply line and check the
whole water system for leaks.
The machine can now be connected
to the power supply (see “Electrical
connection”).
When pushing the machine into the
niche, do not bend or damage the
water line.
Loading ...
Loading ...
Loading ...