Loading ...
Loading ...
Loading ...
26
BEFORE SETTING OVEN CONTROLS
Fahrenheit / Celcius
To change temperature units:
1. Press and hold the light key for 3 seconds to
open the settings menu.
2. Use the + and - keys on the left to select the
Temperature Units function (unt).
3. Use the + and - keys on the right to select F or
C.
4. Press and hold the light key for 3 seconds to
confirm changes.
Energy Savings Mode
To set whether the oven automatically turns o
after twelve hours:
1. Press and hold the light key for 3 seconds to
open the settings menu.
2. Use the + and - keys on the left to select the
Energy Savings function (E S).
3. Use the + and - keys on the right to select on or
oFF.
4. Press and hold the light key for 3 seconds to
confirm changes.
Calibrating Oven Temperature – User Pro-
grammed Offset (UPO)
The oven is calibrated at the factory for accurate
temperatures, but if you feel the temperature is not
right in your kitchen, you can adjust it:
1. Press and hold the light key for 3 seconds to
open the settings menu.
2. Use the + and - keys on the left to select the
User Programmed Oset function (uPo).
3. Use the + and - keys on the right to select how
many degrees to adjust the temperature (nega-
tive values are valid).
4. Press and hold the light key for 3 seconds to
confirm changes.
Food Probe Enable/Disable
You can select whether the food probe is enabled
or disabled and whether the oven turns o when
the probe detects the specified temperature.
To change the food probe settings:
1. Press and hold the light key for 3 seconds to
open the settings menu.
2. Use the + and - keys on the left to select the
Food Probe function (FP).
3. Use the + and - keys on the right to select on or
oFF.
4. Use the + and - keys on the left to select the
End of Cycle function (EoC).
5. Use the + and - keys on the right to select on or
oFF.
6. Press and hold the light key for 3 seconds to
confirm changes.
Factory Reset
You can return all modified settings to their original
factor settings.
To reset to factory settings:
1. Press and hold the light key for 3 seconds to
open the settings menu.
2. Use the + and - keys on the left to select the
Reset function (rSt).
3. Use the + and - keys on the right to select YES
or oFF.
4. Press and hold the light key for 3 seconds to
confirm changes.
Loading ...
Loading ...
Loading ...