FLUKE 9100S-B-156 Dry Block Calibrator with block B, 95 to 707°F

User Manual for the Fluke 9100S-B-156 Dry Block Calibrator with block B, 95 to 707°F - Page 28

For 9100S-B-156.

PDF File Manual, 41 pages, Read Online | Download pdf file

9100S-B-156 photo
Loading ...
Loading ...
Loading ...
9100S Dry-Well Calibrator
Serial Interface Parameters
26
bAUd FlashesbAUdforonesecondandthendisplaysthe
setting
2400b Currentbaudrate
The baud rate of the serial communications may be programmed to 300, 600, 1200,
2400 (default), 4800, or 9600 baud. Use the up or down arrows to change the baud rate
value.
4800 b Newbaudrate
Press “SET” to accept the new setting or “EXIT” to abort the operation and skip to the
next parameter in the menu.
6.11.2 Sample Period
The sample period is the next parameter in the serial interface parameter menu. The
sample period is the time period in seconds between temperature measurements
transmitted from the serial interface. If the sample rate is set to 5, the instrument
transmits the current measurement over the serial interface approximately every ve
seconds. The automatic sampling is disabled with a sample period of 0. The sample
period is indicated by,
SPEr Flashesforonesecondandthentheserialsampleperiod
settingisdisplayed
1 Currentsampleperiod(seconds)
Adjust the value by using the up or down arrows (u d).
60 Newsampleperiod
Press “SET” to accept the new setting or “EXIT” to abort the operation and skip to the
next parameter in the menu.
6.11.3 Duplex Mode
The next parameter is the duplex mode. The duplex mode may be set to full duplex or
half duplex. With full duplex any commands received by the calibrator via the serial
interface are immediately echoed or transmitted back to the device of origin. With half
duplex the commands are executed but not echoed. The duplex mode parameter is
indicated by,
dUPL Flashesforonesecondandthentheserialduplexmode
settingisdisplayed
FULL Currentduplexmodesetting
The mode may be changed using the up or down arrows (u d).
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...