FLUKE 1550C Insulation Resistance Tester, 5 kV, 1 TΩ

User Manual for the Fluke 1550C Insulation Resistance Tester, 5 kV, 1 TΩ - Page 10

For 1550C.

PDF File Manual, 25 pages, Read Online | Download pdf file

1550C photo
Loading ...
Loading ...
Loading ...
1550C/1555
Users Manual
6
Pushbuttons
Use the pushbuttons to control the Tester, view test results, and scroll
through chosen test results. See Table 4.
Use
and to access these menu items:
1.X Insulation Functions:
1.1 Ramp off (default)
1.2 Ramp on
1.3 DAR T= 01-00
1.4 DAR/PI T= 10-00
1.5 DAR [CN]= 01-00
2 Time limit xx-xx
3 Show results
4 Delete results
Push
to make the selection.
Power On/Off
Push to turn on the Tester.
The Tester does a self-check, self-calibration, shows the software
version, and starts in the Test Voltage mode.
In Test Voltage mode, you can:
Change test parameters
Start an insulation test
View stored test results
Download test results
Push
again to turn off the Tester.
Table 4. Pushbuttons
Item Description
Power on/off.
Push to go to the Function menu. Push again to
exit the Function menu. To scroll within the Function
menu, use the arrow pushbuttons.
Scrolls through test voltages, stored test results, timer
duration, and changes test tag ID characters. Use to
answer “yes” to prompts.
After a memory location is set, displays the test
parameters, test results stored in memory. These
include voltage, capacitance, polarization index,
dielectric absorption ratio, and current.
Use to scroll through test voltages, stored test results,
timer duration, and memory locations. Use to answer
“no” to prompts.
Use for Test Voltage mode to start incrementally setting
the test voltage between 250 V and 10 000 V.
Starts and stops a test. Push and hold for 1 second to
start a test. Push again to stop a test.
ENTER
TEST
FUNCTION
1 2 3 4 5 6 7
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct
.com
Loading ...
Loading ...
Loading ...