UNIMAC TOLAHRPLTAA32 30m Retractable Air Hose Reel User Manual

Hose with Reel User Manual

E&OE © Edisons & Mytopia 1

Hose with Reel

User Manual

[Revision 5.0]

READ THIS MANUAL CAREFULLY BEFORE USE – FAILURE TO DO SO MAY

RESULT IN INJURY, PROPERTY DAMAGE AND MAY VOID WARRANTY. • KEEP THIS

MANUAL FOR FUTURE REFERENCE. • Products covered by this manual may vary in

appearance, assembly, inclusions, specifications, description and packaging.

Set-Up

1. Drill 3 x M8 holes to match the holes located in the Mounting Bracket.

2. Connect the hose reel to the Mounting Bracket with the Pivot Pin.

It is recommended to install the mounting bracket at least 80cm from the floor.

UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC `

UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC

Hose with Reel User Manual

E&OE © Edisons & Mytopia 2

Hose Connection

NOTE: You must remove the black protective cover before attaching the air

hose.

1. Pull the copper ring backwards, and visually check the U-shaped groove stuck to the

cylindrical pin.

UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC `

UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC

Hose with Reel User Manual

E&OE © Edisons & Mytopia 3

2. Loosen the cooper ring to rebound, and visually check the U-shaped groove top to

the cylindrical pin.

Operation

1. Pull on the hose and you can manually set the lock positions.

2. When the hose is fully extended, do not continue pulling on the hose.

3. When the hose is retracting, keep hold of the hose nozzle until the hose is fully

retracted into the unit.

Troubleshooting

The most common malfunction is that the hose cannot be retracted automatically after

fully extending the hose.

This often happens due to the hose being locked at the very end position of the locking

point where there is no more extra hose to be pulled out. There are two ways to solve

this:

1. Hold the hose at the yellow warning mark and pull with a jerking motion until the hose

retracts.

2. Place the reel down on its right side, then pull on the hose until it retracts.

UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC `

UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC

Hose with Reel User Manual

E&OE © Edisons & Mytopia 4

Spare Parts

Spare parts available for purchase, scan QR codes below:

QR Code SKU

TOLAHRPLTAA32

TOLWHRPLTAW32

Some experts believe that the incorrect or prolonged use of almost any product

may cause serious injury or death. To help reduce your risk of serious injury or

death, refer to the information below. For more information, see

www.datastreamserver.com/safety



Consult all documentation,

packaging and product labelling

before use. Note that some

products feature documentation

available online. It is

recommended to print and retain

the documentation.



Before each use, check the

product for

loose/broken/damaged/missing

parts, wear or leaks (if applicable).

Never use a product with

loose/broken/damaged/missing

parts, wear or leaks.



Products must be inspected and

serviced (if applicable) by a

qualified technician every 6

months. This is based on average

residential use by persons of

average size and strength, and on

a property of average metropolitan

size. Use beyond these

recommendations may require

more frequent

inspections/servicing.



Ensure that all users of the

product have completed a suitable

industry recognised training

course before being allowed

access to the product.



The product has been supplied by a general

merchandise retailer that may not be familiar

with your specific application or description of

application. Be sure to attain third-party approval

from a qualified specialist for your application

before use, regardless of any assurances from

the retailer or its representatives.



This product is not intended for use where fail-

safe operation is required. As with any product

(for example, automobile, computer, toaster),

there is the possibility of technical issues that

may require the repair or replacement of parts,

or the product itself. If the possibility of such

failure and the associated time it may take to

rectify could in any way inconvenience the user,

business or employee, or financially affect the

user, business or employee, then the product is

not suitable for your requirements. This product

is not intended for use where incorrect operation

or a failure of any kind, including but not limited

to, a condition requiring product return,

replacement, parts replacement or service by a

technician may cause financial loss, loss of

employee time or an inconvenience requiring

compensation.



If this product has been purchased in error when

considering the information presented here,

contact the retailer directly for details of their

returns policy, if required.

descriptive content, concepts, ideas, diagrams or images may be reproduced or

transmitted in any form or by any means, electronic or mechanical, including

photocopying, scanning or recording, or any information storage and retrieval

system, without express permission or consent from the publisher.

UNIMAC TOLAHRPLTAA32 30m Retractable Air Hose Reel Compressor Wall Mounted Auto Rewind

Product's Documents

Product manual

Specifications

UNIMAC TOLAHRPLTAA32 Questions and Answers