Loading ...
Loading ...
Loading ...
Swing Barrier • User Manual
17
1.10 Pass End
Set IR Check passage end position 1. exit (default), 1 safety
1.11 Intrude Set
Set Intrude Alarm Mode 1.no alarm, 2 .alarm (default), 3. alarm and close
1.12 Reverse Set.
Set Passage From Reverse Alarm Mode
1 no alarm, 2. alarm, 3 alarm and close (default),
1.13 Tail-Gating
Set Tail-Gating Alarm Mode 1 no alarm, 2. alarm, 3 alarm and close
(default),
1.14 Adv. Param.
.1 EN_O_SPD.1
Set Motor 1 Speed when Open Door for Entry
.2 EN_C_SPD.1
Set Motor 2 Speed when Open Door for Entry
.3 EX_O_SPD.1
Set Motor 1 Speed when Close Door for Entry
.4 EX_C_SPD.1
Set Motor 2 Speed when Close Door for Entry
.5 EN_O_SPD.2
Set Motor 1 Speed when Open Door for Exit
.6 EN_C_SPD.2
Set Motor 2 Speed when Open Door for Exit
.7 EX_O_SPD.2
Set Motor 1 Speed when Close Door for Exit
.8 EX_C_SPD.2
Set Motor 2 Speed when Close Door for Exit
.9 Save Fact.
Save the current parameter to factory default
.10 Relay Mode
Set add relay use for passed counter
1. disable,(default),2.Enter allow, 3.Exit allow ,4. both ballow
.11 Auto Report
Set automatic report gate status when on change 1 disable (default), 2
allow
.12 NO Direction
Set the normally open the gate opening direction , the default enter
.13 Power Lost
Set the normally open the gate opening direction when Power failure , the
default enter
.14 Barriers
signal or double machine work 1 double (default) , 2 signal
.15 IR Speed
Set IR Sensor Sensitivity(1-100) 0-100(default 100)
.15 IR Type
Set infrared sensor type 1 PNP (default), 2 NPN
.16 IR Logic
Set Use Local IR Sensor Logic
.17 Motor Pro.
Set the motor over current protection threshold, the default 2.5A
.18 Self Check
Set use self check when power on, disabled by default
.19 LED Mode
Set LED indicator default parameter 1 Static LED,2 Square LED
.20 Set DevType
Set Controller Device Type 1 Tripod 2 Flap gate, 3 Swing gate
2. System Set
2.1 Language
Set Menu Display Language
2.2 Device Type
Display Controller Device Type
2.3 Version
Display hardware and firmware version information
2.4 Set Address
Set Device Logic Address
Loading ...
Loading ...
Loading ...