Loading ...
Loading ...
Loading ...
en "Eco Clean" cleaning function
32
▶ Clean the control element Twist Pad Flex using a
soft cloth moistened with soapy water.
1.
Press
on the edge of the stator on the rear of
the control element Twist Pad Flex and remove the
stator .
2.
Clean all of the parts with a cloth moistened with
soapy water.
3.
Dry all of the parts with a soft cloth.
4.
Before assembling, leave all of the parts to dry com-
pletely.
5.
Reassemble the control element Twist Pad Flex.
Regenerating self-cleaning surfaces in the
cooking compartment
The back panel, ceiling and side walls in the cooking
compartment are self-cleaning and have a coarse sur-
face.
ATTENTION!
If you do not clean the self-cleaning surfaces regularly,
they may become damaged.
▶ If dark stains are visible on the self-cleaning sur-
faces, use the cleaning function to clean the cook-
ing compartment.
▶ If a prompt to clean appears in the display, use the
cleaning function to clean the cooking compart-
ment.
▶ Do not use oven cleaner or abrasive cleaning aids.
If oven cleaner accidentally comes into contact with
the self-cleaning surfaces, dab it off immediately us-
ing water and a sponge cloth. Do not rub.
▶
Use the cleaning function.
→"Eco Clean cleaning function", Page32
"Eco Clean" cleaning function
19 "Eco Clean" cleaning function
Use the cleaning function "Eco Clean"
regularly to
help retain the cleaning ability of the self-cleaning sur-
faces and prevent damage.
The self-cleaning surfaces in the cooking compartment
are coated with a porous, matt ceramic layer and have
a rough surface. When the appliance is in operation,
the self-cleaning surfaces absorb splashes from roast-
ing or grilling and break them down.
The following surfaces are self-cleaning:
¡ Back wall
¡ Ceiling
¡ Side walls
ATTENTION!
If you do not clean the self-cleaning surfaces regularly,
they may become damaged.
▶ If dark stains are visible on the self-cleaning sur-
faces, use the cleaning function to clean the cook-
ing compartment.
▶ If a prompt to clean appears in the display, use the
cleaning function to clean the cooking compart-
ment.
▶ Do not use oven cleaner or abrasive cleaning aids.
If oven cleaner accidentally comes into contact with
the self-cleaning surfaces, dab it off immediately us-
ing water and a sponge cloth. Do not rub.
19.1 Cleaning recommendation
The appliance records the type and duration of the op-
eration and, if required, recommends which cleaning
function to use.
When you switch on the appliance, a notification ap-
pears on the display stating that you should use the
cleaning function. Start the cleaning function as soon
as possible.
You can use your appliance as normal. However, the
cleaning recommendation appears on the display until
you have run the cleaning function in full.
Note:If the appliance is prematurely contaminated, e.g.
by greasy poultry or roasts, or if dark spots appear on
the self-cleaning surfaces, do not wait until the notifica-
tion appears on the display before you use the clean-
ing functions. The more often you use the cleaning
function, the longer the cleaning ability of the self-clean-
ing surfaces is retained.
19.2 Preparing the appliance for the
cleaning function
In order to achieve a good cleaning result, prepare the
appliance carefully.
ATTENTION!
Using oven cleaner on the self-cleaning surfaces dam-
ages the surfaces.
▶ Do not use oven cleaner on the self-cleaning sur-
faces. If oven cleaner does get onto these surfaces,
dab it off immediately using water and a sponge
cloth. Do not rub the surface and do not use abras-
ive cleaning aids.
1.
Remove accessories and cookware from the cook-
ing compartment.
2.
Detach the shelf supports and remove them from
the cooking compartment.
→"Rails", Page35
3.
Remove coarse dirt using soapy water and a soft
cloth:
– From the cooking compartment floor
– From the inside of the appliance door
– From the glass cover on the oven lamp
This prevents stains that cannot be removed.
4.
Remove any objects from the cooking compartment.
The cooking compartment must be empty.
Loading ...
Loading ...
Loading ...