Loading ...
Loading ...
Loading ...
ADVANCED CONFIGURATION
129
LIN Serial Bus Interface
The local interconnect network (LIN) bus is a single wire interface.
Panel operation
1. Connect the bus signal (LIN Input) to one of the
oscilloscope’s analog. Connect the ground
potential to one of the probes’ ground clip if
you are using the analog channels.
LIN input
GND
X
10
X
1
2. Press the Bus key.
BUS
B
3. Press Bus from the bottom menu
and choose the LIN serial bus.
4. Press Analog Source to choose
whether the source for the LIN bus
is analog.
Define Inputs
5. Press Define Inputs from the lower
menu.
6. From the side menu choose the
LIN input and the polarity of the
bus.
LIN Input
CH1~CH4
Loading ...
Loading ...
Loading ...