Loading ...
Loading ...
Loading ...
Sarix® Multi Enhanced Installation Manual
C6730M | 03/30/23
55
1. Brown — AUX1 Auxiliary Power wire, accepts either polarity
2. Blue — AUX2 Auxiliary Power wire, accepts either polarity
3. White — Audio Input (line level)
An external power amplifier should be used when connecting speakers and microphones, as
shown in the diagram.
4. Yellow — Audio Ground return
5. Green — Audio Output (line level)
6. Purple — Relay Output: When active, Output is internally connected with the Ground. Circuit is
open when inactive. Maximum load is 25 V DC, 100 mA.
7. Gray — Relay Ground return
8. Red — Relay Input: To activate, connect the Input to the Ground wire. To deactivate, leave it
disconnected or apply between 3-15 V.
l
* — Relay
l
** — Switch
l
M — Microphone
l
S — Speaker
l
AUX1 — Brown Auxiliary Power wire
l
AUX2 — Blue Auxiliary Power wire
Seamless Failover
Redundant power with seamless failover is available on the Sarix Multi Enhanced camera. Seamless
failover allows the camera to transition between PoE and auxiliary power sources without any
interruption of camera operation or video recording. This is mainly useful if you want redundant power
sources so that backup power will be available if one power source goes down.
Note: Seamless failover is only guaranteed when “full power” is available on the PoE port.
Auxiliary (Aux) power is always assumed to be “full power,” meaning that there is enough power
available for all possible camera functions. PoE, on the other hand, has many different power
Loading ...
Loading ...
Loading ...