Loading ...
Loading ...
Loading ...
Sarix® Multi Enhanced Installation Manual
C6730M | 03/30/23
50
2. Access the camera’s web interface to enable the onboard storage feature. For more information,
see the Pelco Sarix Multi Enhanced Camera Operations Manual.
Initializing a Camera Username and Password
Important: You must create a user with administrator privileges before the camera is operational.
If the camera is in the factory default state, you will be redirected to the New User page to create an
administrator user:
1. Enter a new User Name or keep the default administrator name.
2. Enter a new Password for the user. It is recommended to use a secure and complex password.
3. Confirm the new password.
4. For the first user, Administrator must be selected in the Security Group drop-down menu.
5. Click Apply. After creating the user, you will be asked to login.
Tip: If you are connecting your Pelco camera to a 3rd party VMS, you will need to set up the first
user through the camera's Web Interface or Camera Configuration Tool before you connect to the
3rd party VMS.
Assigning an IP Address
The device automatically obtains an IP address when it is connected to a network.
Note: If the device cannot obtain an IP address from a DHCP server, it will use Zero Configuration
Networking (Zeroconf) to choose an IP address. When set using Zeroconf, the IP address is in the
169.254.0.0/16 subnet.
The IP address settings can be changed using one of the following methods:
l
Device's web browser interface: http://<camera IP address>/.
l
Network Video Management software application (for example, the Pelco VideoXpert software).
l
ARP/Ping method. For more information, see Setting the IP Address Using the ARP/Ping Method.
Accessing the Live VideoStream
Live video stream can be viewed using one of the following methods:
l
Web browser interface: http://< camera IP address>/.
l
Network Video Management software application (for example, the Pelco VideoXpert software).
Installing the Sarix Multi Enhanced Camera Base to an In-Ceiling Mount
After the cable connections have been made, mount the Sarix Multi Enhanced camera base into the in-
ceiling mount adapter.
1. Inspect the PoE switch setting in the camera base to verify it is set correctly for your installation.
The "B" position is the default position that is compatible with the 802.3bt standard. The "A"
position should be used for legacy HPoE injectors PD-9501G, PD-9501GR, and PD-9601G. For
more information, see the Overview section.
2. (Recommended) Attach a safety lanyard from the in-ceiling mount adapter to the lanyard anchor
on the camera base to prevent the camera from falling. See Connecting Cables.
Loading ...
Loading ...
Loading ...