Loading ...
Loading ...
Loading ...
Sarix® Multi Enhanced Installation Manual
C6730M | 03/30/23
31
a. Use the supplied mounting template to determine the cable entry location. Drill a hole in the
mounting surface and route the conduit and cables through the hole. Install the conduit and
its fitting as instructed by the manufacturer.
b. Drill 4 mounting holes as marked on the mounting template.
c. Pull the cables through the rear cable entry hole on the surface mount adapter.
d. Use a screwdriver to secure the mounting adapter to the mounting surface with the 4
mounting screws.
e. Secure the conduit to the surface mount adapter with the lock nut.
Note:
If installing outdoors, apply silicone sealant around the edge of the surface mount
adapter that is connected to the mounting surface.
3. If you are using the side cable entry hole:
Loading ...
Loading ...
Loading ...