Loading ...
Loading ...
Loading ...
Figure 8-10 Draw Area
6.
Click Save.
7.
Repeat above steps to draw other regions.
8.
Set arming schedule. See
Set Arming Schedule .
9.
Set linkage method. See
Linkage Method Sengs .
Set Line Crossing
Detecon
Line crossing detecon is used to detect the object movement of crossing a predened line. When
it occurs, the device takes linkage
acons as response.
Steps
1.
Go to Conguraon → Event → Smart Event → Line Crossing Detecon .
2.
Select a device channel.
Note
Only panoramic channels support the funcon.
3.
Check Enable.
4.
Draw
detecon line.
1) Select a Line No.. Up to 4 lines can be set.
2) Click
Detecon Area.
A yellow line is displayed on live image.
3) Click on the line, and drag its end points to adjust the length and the
posion.
4) Select the Direcon for the detecon line.
Stched PanoVu Camera with PTZ User Manual
75
Loading ...
Loading ...
Loading ...