Loading ...
Loading ...
Loading ...
Tracking Inial Posion
When tracking nishes or med out, PTZ channel returns to the tracking inial posion.
When tracking inial is not set, PTZ channel stays where tracking nishes or med out.
11.
Set the tracking duraon. Click Save.
Tracking Duraon
It is used to set the duraon of tracking. The PTZ channel switches to next target aer the
set
duraon me. When tracking duraon is set to 0, tracking connues unl the target
leaves the scene.
12.
Set the zooming
rao. Click Save.
Zooming Rao
It is used to set the zooming rao for tracking. The higher the value is, the larger the target is
in the close-up view.
4.12.3 Advanced
Sengs for Panorama Tracking
Note
The advanced sengs are only available when you select VCA resource as Smart Event for PTZ and
panoramic channels.
Tracking Takeover
When the target leaves the view of the panoramic channel, the PTZ channel takes over the leading
role of the task and keeps tracking.
Check to enable the
funcon.
4.13 Set Device
Posion
Before You Start
Go to
Conguraon → PTZ → Basic Sengs → PTZ OSD to enable PT Status display.
Use other direcon indicang devices to nd the North at the device locaon.
Steps
1.
Go to Conguraon → PTZ → Posion Sengs .
2.
Set compass.
1) Adjust the
lt posion of the device to 0 by controlling the up arrow and down arrow on the
PTZ panel.
2) Adjust the pan
posion to show the live view of the north direcon by controlling the le
arrow and right arrow on the PTZ panel.
3) Click Set as North.
3.
Click Gyroscope
Atude Calibraon to calibrate gyroscope.
Stched PanoVu Camera with PTZ User Manual
30
Loading ...
Loading ...
Loading ...