Hikvision DS-2DP3236ZIXS-D\/440F0P4 Hikvision Stitched PanoVu with PTZ User Manual

Loading ...

Click to clear selected areas.

Click to clear all the areas.

Note

Up to 8 areas can be set at the same me.

Select an area from the list and set the target size as Large-size Target or Small-size Target.

Click

, and a frame of 40 × 40 pixels will be displayed in the live image. If the shoulder of

the target is wider than the frame, you should select Large-size Target.

Click , and a frame of 20 × 20 pixels will be displayed in the live image. If the shoulder of

the target is shorter than the frame, you should select Small-size Target.

Note

If the shoulder width is between the two modes, adjust installaon posion and device angle to

meet the requirements.

Dene the Density Level by the number of people in the detecon area and the target pixel

rao.

Number of

People

Set the range for each level by inpung the lower limit of the number of

people in the detecon area.

Target Pixel

Rao

Target pixel rao refers to the rao of the detecon area occupied by

people. Check Enable Target Pixel Rao and input the lower limit of target

pixel rao for each level.

Note

●

Up to three levels can be congured. The density increases from level 1 to level 3.

●

The target pixel rao is oponal. When it is enabled, both the set number of people and the

rao should be met to reach the density level.

Example

Set the people number of Level 1 as 10, Level 2 as 100, and Level 3 as 1000. When the number

of people in the detecon area is less than 10, the alarm is not triggered. When the number of

people is between 10 and 100, Level 1 alarm is triggered. When the number of people is

between 100 and 1000, Level 2 alarm is triggered. When the number exceeds 1000, Level 3

alarm is triggered.

Click Save.

Set arming schedule. See

Set Arming Schedule .

Set linkage method. See Linkage Method Sengs .

Set data uploading parameters in Data Upload.

1) Check Enable Data Uploading, and the data of people density

detecon is uploaded to

surveillance center.

Oponal: Check Enable Picture Uploading, and the alarm is uploaded to surveillance center

with pictures.

3) Set the Uploading Mode.

Stched PanoVu Camera with PTZ User Manual

Loading ...

Hikvision DS-2DP3236ZIXS-D\/440F0P4 DS-2DP3236ZIXS-D/440F0P4 32MP 360° Panoramic and PTZ Camera

Hikvision Stitched PanoVu with PTZ User Manual - Page 24