Loading ...
Loading ...
Loading ...
8.3.1 Set Smart Event Rules
Line crossing detecon, intrusion detecon, region entrance detecon, and region exing
detecon
are available. Rules for each detecon and the detecon priority should be set
separately.
Set Intrusion Detecon
Intrusion detecon detects the object movement of entering and loitering in a predened area.
When intrusion occurs, the device takes linkage acons as response.
Steps
1.
Go to
Conguraon → Event → Smart Event → Intrusion Detecon .
2.
Select a device channel.
Note
Only panoramic channels support the funcon.
3.
Check Enable.
4.
Draw detecon area.
1) Select a Region No.. Up to 4 regions can be set.
2) Click
Detecon Area.
3) Click on the live image to draw the boundaries of the detecon area, and right click to
complete drawing.
5.
Set
detecon parameters.
Detecon Target
You can specify the object type, and the device only detects the selected type of objects.
Sensivity
It stands for the sensivity of detecng an target. The higher the value of sensivity is, the
more easily the target is detected.
Threshold
Threshold stands for the me of the object loitering in the region. If the me that object stays
in the region exceeds the threshold, the alarm is triggered.
Priority
It stands for the device response priority to the
detecons. When several perimeter
detecons happen at the same me and the device resources are limited to response to all,
the one with higher priority level goes
rst.
Note
For the model with 2 panoramic channels, the priority of the detecons in Camera 02 is
higher than all detecons in Camera 03.
Stched PanoVu Camera with PTZ User Manual
74
Loading ...
Loading ...
Loading ...