Hikvision DS-2DP3236ZIXS-D\/440F0P4 DS-2DP3236ZIXS-D/440F0P4 32MP 360° Panoramic and PTZ Camera

Hikvision Stitched PanoVu with PTZ User Manual - Page 39

For DS-2DP3236ZIXS-D\/440F0P4.

PDF File Manual, 122 pages, Read Online | Download pdf file

DS-2DP3236ZIXS-D\/440F0P4 photo
Loading ...
Loading ...
Loading ...
8.
Set the zooming rao. Click Save.
Zooming Rao
It is used to set the zooming rao for tracking. The higher the value is, the larger the target is
in the close-up view.
Note
Tracking Duraon and Zooming Rao sengs are only supported under some VCA resources.
4.12.2 Set Panorama Tracking – Manual Calibraon
Steps
1.
Go to
Conguraon → PTZ → Panorama Tracking .
2.
Check Track.
3.
Oponal: Check Enable Linkage Capture and Upload if you want to capture and upload pictures
during tracking.
4.
Select the
Calibraon Mode as Manual. Click Start Calibraon.
5.
Select a scene.
6.
Add
calibraon points.
1) Select a No. in Calibraon Parameter list. Click .
A numbered green cross displayed on the live image.
2) Drag the green cross to a certain
posion.
3) Repeat the steps above to add more calibraon points.
Note
It is recommended to add at least 9 calibraon points in one scene. For higher tracking
precision, up to 12 calibraon points can be added. Calibraon points should be distributed
evenly in live image, for example, 3 points at far range, middle range, and close range each.
It is recommended to put
calibraon points at disnct posions in live image (for example,
corners). If no
disnct posion is available, you can place something (for example, box, stool,
or people) to mark the
posion.
7.
Link the PTZ channel to the calibraon points in panorama view.
1) Select a calibraon point in panorama view.
2) Adjust the PTZ channel to set the center of the close-up view at the same
posion as the
calibraon point in panorama view by using the PTZ control buons or by clicking and then
clicking or dragging an area on live image.
3) Click
to link the current PTZ posions to the calibraon point.
4) Repeat the steps above to link other
calibraon points.
8.
Click Start Calibraon to nish the calibraon for the current scene.
9.
When
calibraon is complete, click Stop Calibraon to exit.
10.
Set tracking inial posion. Use the PTZ buons to adjust close-up view. Click Set Tracking
Inial Posion to nish seng.
Stched PanoVu Camera with PTZ User Manual
29
Loading ...
Loading ...
Loading ...