Loading ...
Loading ...
Loading ...
To reduce the risk of severe injury or death:
1. READ AND FOLLOW ALL INSTALLATION INSTRUCTIONS.
2. Check with the door manufacturer to determine if additional reinforcement is required to
support the door prior to installation of the garage door opener.
3. Install garage door opener only on a properly balanced garage door. An improperly balanced
door could cause serious injury. Have a qualified service professional make repairs to garage
door cables, spring assemblies and other hardware before installing the opener.
4. Remove all ropes and disable all locks connected to the garage door before installing opener.
5. Mount the emergency release handle 6’ (1.8 m) above floor.
6. Do not connect the opener to source of power until this manual instructs you to do so.
7. Locate the wall console or wall console:
A. Within sight of the garage door.
B. Out of reach of children at minimum height of 5’ (1.5 m).
C. Away from all moving parts of the door.
8. Place entrapment warning label on wall next to garage door wall control.
9. Install the Emergency Release Handle on the emergency release rope.
10. Place manual release/safety reverse test label in plain view on inside of garage door.
11. Upon completion of the installation, the door must reverse when it comes in contact with a 1
1/2” (3.8 cm) high object on the floor (or a 2x4 laid flat at the centre of the door) and when the
infrared safety beam is blocked.
An overall view of a completed garage door
opener system installed on a sectional door. The
arrangement is similar for a one-piece jamb door
(except for differences described later in this
manual).
IMPORTANT INSTRUCTIONS
IMPORTANT INSTRUCTIONS
77 88
BAG D
Door Mounting Bracket
D1 x 1
D2 x 1
D3 x 4
Clevis Pin
Hitch Pin
Lag Screw
BAG E
Head and Hanging Bracket
E1 x 1
E2 x 1
E3 x 2
Clevis Pin
Hitch Pin
Self Tapping Screw
BAG F
Door Arms and Trolley
F2 x 1
F1 x 1
F3 x 2
G1 x 2 G2 x 2
Clevis Pin
Hitch Pin
Bolt
Bolt
BAG G
Hanging Bracket
Locknut
F4 x 2
Locknut
BAG C
Idler Pulley
C1 x 1
C2 x 1
Clevis Pin
Hitch Pin
C3 x 2
Spacer
BAG B
Rail Assembly
B1 x 2
B3 x 1
Locknut
Bolt
B2 x 1
Bolt
WHAT IS INCLUDED
Loading ...
Loading ...
Loading ...