Godox WEC-S KIT 2 User Manual

Loading ...

8.1 Charging through USB-A to USB-C Cable

The transmitter and receiver can be charged after connecting to power source through

USB-A to USB-C cable.

8. Charging

Put the transmitter/receiver into the charging case, the case will rst detect whether the

transmitter/receiver is correctly inseed into the corresponding slot, the corresponding internal

status indicator will light up if the pins inside touched the charging points of the transmitter/

receiver. Then it will detect whether the transmitter/receiver is fully charged, if not, it will sta

charging until it’s fully charged. The internal status indicators and external charging indicators will

light up at the same time to show the batte level of the transmitter/receiver and the charging

case itself if the charging case lid is open.

When charging the case itself, the four external charging indicators will ash white incrementally,

and be constant on white after the charging case is fully charged.

8.2 Charging Through Charging Case

Indicator Status Meaning

Indicators of transmitter and receiver ash white Charging

Fully charged

Indicator of transmitter ashes red eve 0.5s Batte level of transmitter is below

10%

TX1 indicator of receiver is constant on red,

TX2 indicator of receiver displays normally

Batte levels of receiver and

transmitter TX2 are normal, while

batte level of transmitter TX1

is below 10%

Indicators of transmitter and receiver are

constant on white

TX1 indicator of receiver displays normally,

TX2 indicator of receiver is constant on red

Batte levels of receiver and

transmitter TX1 are normal, while

batte level of transmitter TX2 is

below 10%

TX1 and TX2 indicators of receiver are constant

on red

Batte level of receiver is normal,

while batte levels of transmitter

TX1 and TX2 are below 10%

TX1 and TX2 indicators of receiver ash red eve

0.5s

Batte level of receiver is below 10%

29 30

Loading ...

Godox WEC-S KIT 2 2-Person Wireless Microphone System