Loading ...
Loading ...
Loading ...
Note: The transmitter and receiver will be turned o if they stay unpaired in 5min after powered on.
Instructions for Use
1.1 Operating Instructions
Press and hold the power switch button< >for 3s to turn on or o the transmitter and
receiver. Take out the devices from the charging case, they will boot up automatically, while
put them into the charging case, they will be turned o.
1. Power Switch
2.1 Operating Instructions
Press and hold the pairing/denoise button< >of transmitter and pairing/volume +
button< >of receiver for 2s to pairing them. They will exit pairing status once paired,
while exit after 10s if unpaired.
2. Pairing
1.2 Indicator Instructions
Indicator Status Meaning
Indicator of transmitter ashes green eve 0.5s Unpaired after powered on
Both indicators of receiver ash green eve 0.5s Unpaired after powered on
2.2 Indicator Instructions
Indicator Status Meaning
Indicator of transmitter ashes green rapidly eve 0.25s Pairing status
Paired
Both indicators of receiver ash green rapidly eve 0.25s Pairing status
TX1 indicator of receiver is constant on green, TX2
indicator of receiver is o
One transmitter and one
receiver are paired
Both indicators of receiver are constant on green
Two transmitters and one
receiver are paired
Indicator of transmitter is constant on green
25 26
Note: If two transmitters are paired with the receiver but one of which is turned o later, then its corresponding
TX1/TX2 indicator will be o in 30s.
Loading ...
Loading ...
Loading ...