Loading ...
Loading ...
Loading ...
AXIS Q1602 N etwork Camera
Hardware overview
• Connecting to AXIS Internet Dynamic DNS Service. See page 33. To connect, press and hold the button for about 3
seconds.
• Resetting the product to factory default settings. See pag e 40.
Power connector - 2-pin terminal block for power input.
I/O connector
DC power input
Note
For technical specifications, see page 46.
I/O terminal connector - Use in applications for e .g. motion detection, event triggering, time lapse recording and alarm notifications.
In addition to an auxiliary pow er and a GND pin, the I/O terminal connector provides the interface to:
• Digital output — For connecting external devices such as relays and LEDs. Connected devices can be activated by the
VAPIX® Application Programming Interface, output buttons on the Live View page or by a n Action Rule. The output will
show as active (shown under System Options > Ports & Devices) if the alarm device is activated.
• Digital input — An alarm input for connecting devices that can toggle between an open and closed circuit, for example:
PIRs, door/window contacts, glass break detectors, etc. When a signal is received the state changes and the input
becomes active (shown under System Options > Ports & Devices).
Function Pin Notes
Specifications
GND
1
Ground
3.3 V DC Power
2
Can be used to power auxiliary equipment.
Note: This pin can only be used as power out.
Max load = 50 mA
Digital Input
3
Connect to GND to activate, or leave floating (unco
nnected)
to deactivate.
0to+40VDC
Digital Output
4
Internal connection to ground when activated, floating
(unconnected) when deactivated. If used with an external
relay, a diode must be connected in parallel with the load, for
protection against voltage transients.
Max load =100 mA
Max voltage = +40 V DC
6
Loading ...
Loading ...
Loading ...