Loading ...
Loading ...
Loading ...
Problem Cause Solution
The machine
cuts the grass
unevenly.
1.
The blade is dull.
2. The blade is bent.
3. The deck is uneven.
1. Grind the blade according to the manual.
2. Replace the bent blade, replace the blade accord-
ing to the instructions in the manual, and wear
protective equipment.
3. Adjust the cutting deck according to the instruc-
tions in the manual to ensure the left and right
deck height are even.
The actual cut
height does not
match the cut
height you set.
1. The bolt of the deck is loose.
2. The deck is severely worn or damaged.
1. Adjust the cutting deck bolt, make sure the deck
is not loose. Please balance the deck level after
each adjustment.
2. Replace with a new cutting deck.
The machine
cuts the grass
abnormally.
1. The grass is too wet.
2. The grass amount you set is too much.
1. Please check the grass before working. If the
grass is too wet, please wait until the grass gets
drier.
2. If the grass is too intensive and high, raise the
deck height, and avoid cutting intensive grass.
The machine vi-
brates too much.
1. The blade is loose.
2. The blade is bent.
3. The deck is uneven.
4. The deck is loose.
5. The blade cuts too much grass more than the
amount you set.
1. Grind the blade according to the manual.
2. Replace the bent blade, replace the blade accord-
ing to the instructions in the manual, and wear
protective equipment.
3. Adjust the cutting deck according to the instruc-
tions in the manual to ensure the left and right
deck height are even.
4. Tighten the fixing bolts of the deck.
5. If the grass is too intensive and high, please raise
the cutting deck and try to avoid cutting intensive
grass.
There is grass or
debris on the
ground after
mowing.
1. The blade cuts too much grass more than the
amount you set.
2. The grass is too wet.
3. You drive too fast.
4. The blade speed is too low.
1. If the grass is too dense and high, please raise the
cutting deck. If the grass height exceeds 6 inch,
please cut the area repeatedly. Try to avoid cut-
ting intensive grass.
2. Please check the grass before working. If the
grass is too wet, please wait until the grass gets
drier.
3. Reduce the drive speed.
4. Turn the blade speed to high position.
The cutting en-
durance time is
short.
Heavy grass can short the running time of the lawn
mower.
Raise the cutting deck and reduce the blade speed to
extend the running time.
The machine is
off track.
The tire pressure of left and right rear wheels is dif-
ferent.
Regularly check the tire pressure of the rear tires ac-
cording to the manual.
The machine
fails to start af-
ter cleaning.
Improper cleaning, water enters the battery compart-
ment or the key switch fails.
1. When cleaning the machine, please clean it ac-
cording to the instructions.
2. If the vehicle is accidentally exposed to rain,
please put the vehicle in a dry place for 12 hours
or dry it before use.
3. Contact a service center for help.
The mower is
blocked.
The deck is full of weeds and garbage. Please clean the machine correctly according to the
instructions after each use.
35
English
EN
Loading ...
Loading ...
Loading ...