Loading ...
Loading ...
Loading ...
Bolt holes
13.2ft.lbs
18.4ft.lbs
W
ashers
Bolts
Hole
Steering shaft
Model cover plate
Bolt
Washer
Steering wheel
Steering column
Slot
Steering shaft
1. Install the steering shaft into the coupler, rotating as
needed to align hole in shaft with bolt hole in coupler
.
2.
Install two bolts and tighten securely.
NOTE
Torque bolts to the value as shown.
3. Install the steering column. Note the tabs on the bottom
of the steering column that fit into the holes in the
opening and make sure steering column is securely
seated.
4. Make sure the mower
’s wheel is pointed straight ahead,
then install the steering wheel over the steering column
with force.
5. Install the bolt and washer; tighten securely.
6. Install the steering wheel cover plate.
7.4 INSTALL THE ACCESSORIES
1. Mulch cover
7.4.1 INSTALL THE MULCH COVER
Bolt
Bolt
Bolt
Nut
Nut
Nut
W
asher
Bracket
Bracket
Bearing ring
Mulch cover
Bolt
The mower is configured for side discharge when shipped. If
mulching is desired:
1. Place the mulch cover on the tab on the mower housing.
2.
Align the holes in the mulch cover and the holes in the
mower housing.
3. Install and tighten the bolts, screws, fixation clamps and
bearing ring as shown.
8 OPERATION
WARNING
W
ear eye protection during operation.
8.1 BEFORE OPERATION
8.1.1 ADJUST THE SEAT
Adjust the seat position to ensure you are able to make firm
contact with the accelerator and brake pedals before operating
the mower.
10
English
EN
Loading ...
Loading ...
Loading ...