Loading ...
Loading ...
Loading ...
Insulation Multimeters
Buttons
7
Table 3. Buttons
Button Description
h
Press to freeze the displayed value. Press
again to release the display.
When a reading changes, the display
updates and the Meter beeps.
In MIN MAX AVG or Hz mode, this button
operates a display hold.
In Insulation Test mode, this schedules a
test lock the next time you press t on
the Meter or on the remote probe. The test
lock acts to hold down the button until your
press h or t again to release the
lock.
m
(1587 and
1587T
only)
Press to start retaining maximum, minimum,
and average values. Press successively to
display maximum, minimum, and average
values. Press and hold to cancel
MIN MAX AVG.
Button Description
f
(1587 and
1587T
only)
Activate frequency measurement.
r
Changes Ranging mode from Auto (default)
to Manual Ranging mode. Press and hold to
return to Auto Ranging mode.
H
Turns the backlight on and off. The backlight
goes off after 10 minutes.
t
Initiates an insulation test when the rotary
switch is on the
INSULATION position. Causes
the Meter to source (output) a high voltage
and measure insulation resistance.
G
The blue button. Functions as a shift key.
Press to access blue functions on the rotary
switch.
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...