Loading ...
Loading ...
Loading ...
– 41 –
Auto Sensor Programs
This feature allows you to cook or reheat
foods without entering the weight. The built-in sensor
measures the humidity of the food and calculates the
recommended microwave power level together with a
suggested cooking time.
How it works
Once the food has been selected and Start pressed
the food is heated up. As food begins to get hot,
steam is emitted. When the food reaches a certain
temperature and begins to cook, an even greater
amount of steam is released. The increase in steam
emission is detected by a humidity sensor in the oven.
This acts as a signal for the oven to calculate how
much longer the food needs to cook.
The remaining cooking time will appear in the display
window after two beeps.
Whilst the Sensor program is still in the display
window the oven door should not be opened. Wait
until the cooking time appears in the window, and then
open the door if required, to stir or turn the food.
Adjust to Taste
The Sensor programs cook foods for average tastes. You are able to adjust the cooking programs to your own
taste. After pressing Start, turn dial clockwise for more time or anti- clockwise for less time. This operation
should be completed within 14 seconds. Default mode is normal.
To allow Auto Program
operation, ensure the
oven is in clock mode.
Select desired Auto Sensor
Program by turning the dial.
Press the dial to confirm the program.
Auto program number appears in the
display. The microwave and sensor
auto symbols appear in the display and
frozen food symbol if applicable.
Press Start. The food category will
be repeated in the display window
until the oven calculates the cooking
time after detecting a burst of steam.
Do not open the oven door until the
remaining cooking time appears in the
display window.
Notes
For best results the Sensor programs should only be used when the oven is cold. It is recommended
that the oven is allowed to cool between using the sensor programs, if one or more programs are being
used. If in a hurry, cook the food manually i.e. select the correct power level and cooking time. It is not
recommended to keep using the Auto Sensor Programs consecutively.
Loading ...
Loading ...
Loading ...