Loading ...
Loading ...
Loading ...
– 34 –
One Push Reheating
This unique feature ‘the Genius’ built in sensor allows you to reheat a chilled meal with one push of
the dial. It is not necessary to select the power level or cooking time. The built-in sensor measures the
humidity of the food and calculates the microwave power level together with a cooking time.
When clock mode is displayed,
press the dial to start. To reset
oven and return to clock mode,
press Stop/Reset.
Program Weight Accessories Instructions
Reheat a
fresh
pre-cooked
chilled meal
200-1000 g
All foods must be pre-cooked. Foods should be at
refrigerator temperature approx.+ 5 °C. Reheat in
microwavable container as purchased. Pierce covering
film with a sharp knife once in the centre and four times
around the edge.
If transferring food to dish, cover with pierced cling film.
Press dial to Start. Stir at beeps. Stir again at end of
program and allow a few minutes standing time.
Large pieces of meat/fish in a thin sauce may require
longer cooking. This program is not suitable for starchy
food such as rice, noodles or potatoes.
How it works
Once the One Push Reheating has been selected and Start is pressed the food is heated up. As food begins
to get hot, steam is emitted. When the food reaches a certain temperature and begins to cook, an even greater
amount of steam is released. The increase in steam emission is detected by a humidity sensor in the oven. This
acts as a signal for the oven to calculate how much longer the food needs to cook.
The remaining cooking time will appear in the display window after two beeps.
Whilst the Sensor program is still in the display window the oven door should not be opened. Wait until the
cooking time appears in the window, and then open the door if required, to stir or turn the food.
Adjust to Taste
The One Push Reheating reheats a chilled meal for average tastes. You are able to adjust the reheating
program to your own taste. After pressing Start, +/- symbol and flashing bar appears in the display, turn dial
clockwise for more time or anticlockwise for less time. This operation should be completed within 14 seconds.
Default mode is normal.
Loading ...
Loading ...
Loading ...