Loading ...
Loading ...
Loading ...
20 www.electrolux.com
When the program is completed and
the door lock indicator “ ” goes off,
you can open the door.
Press “Start/Pause ” to start the
program.
When The Washing Program
Is Completed, But There Is
Water In The Drum
(Option “Extra Silent” or “Rinse Hold”
is used)
The drum turns regularly to prevent
the creases in the laundry.
You must drain the water to open the
door.
The indicator “Start/Pause ”
flashes to remind you to drain the water.
-
-
-
5.10
The appliance stops automatically.
The acoustic signal will operate.
The display will show “ ”.
The indicator of the touchpad
Start/Pause goes off.
-
-
-
-
-
-
-
-
The door lock indicator “ ” goes off.
Remove the laundry from the
appliance. Make sure that the drum is
empty.
Keep the door partly open, to prevent
the mildew and odours.
Turn off the water tap.
5.9 At The End Of The Program
At the end of the program, the
time remaining can suddenly
decrease from 7 minutes or less to
0 due to the overestimated total
program time during the load
sensing phase. In some cases
(with perfectly balanced load) the
program time can be shorter than
the time estimated after the load
sensing phase is completed. This
is a normal behavior of the
machine and not a cause for
concern as it does not
compromise its performance.
AUTO Off Mode
5.11
The AUTO Off mode automatically
deactivates the appliance to decrease
the energy consumption when:
You do not press any buttons for
5 minutes before you press
“Start/Pause ”.
Press the “On/Off” button to
activate the appliance again.
After 5 minutes from the end of the
washing program.
Press the “On/Off” button to
reactivate the appliance. Display will
show the end of the last wash.
-
Press any touchpad again to show
the last wash program.
-
Touch the program touchpad to set a
new wash program.
-
NOTE:
The door lock indicator “ ” is on.
The door stays locked.
1.
To drain the water:
Press the “Start/Pause ” touchpad.
The appliance drains the water and
spins with the maximum spin speed for
selected program.
Alternatively, before pressing the
“Start/Pause ” touchpad, you can
press the “Spin ” touchpad to
change the spin speed. You can
select “No Spin ”, if you want the
machine to only drain the water.
2.
Press the “On/Off” button to deactivate
the appliance.
3.
After approximately 18 hours, if you do
not press Start/Pause touchpad, the
appliance will drain and spin automati-
cally (except for “Wool” program) .
Loading ...
Loading ...
Loading ...